PL519-1Y01_14 Datasheet, PDF (1/1 Pages) P-tec Corporation – 5mm LED Snap-in Panel Mount Holder

P-tec Corp.
Tel:[phone]
2405 Commerce Circle Tel:[phone]
Alamosa CO 81101 Fax:[phone]
www.p-tec.net
PL519 Series 5mm LED Snap-in Panel Mount Holder
Features
*Snap-in Design Requires no Hardware
*Mounting Hole 6.35 mm (0.25”)
*Housing Material Black Nylon UL94V-2
*1 Yellow LED with Color Diffused
Lens used
*Standard Terminals
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25°C
Power Dissipation……………………………………………………………….... 78mW
Reverse Voltage (<100μA)….………………..……...…...…….………………….…. 5.0V
Max Forward Current…….…………..………………….……..…………………. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…………….….. 100mA
Operating Temperature Range……………………………………….…. -25°C to +85°C
Storage Temperature Range……………….....………………….…….. -40°C to +100°C
Soldering Temperature (1.6 mm below body)………....…………………... 260°C for 5 seconds
Part Number
Electrical & Optical Characteristics at T_A = 25°C
Emitting
Color
Chip
Material
Peak Dominant Viewing
Wave Wave Angle
Length Length 2θ ½
nm
nm
Deg
Forward
Voltage
@20mA (V)
Typ Max
Luminous
Intensity
@20mA (mcd)
Min Typ
PL519-1Y01
Yellow
GaAsP 585
590
38°
2.1 2.6 10.0 24.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
0.8±0.5
10.6
0.2 +0.1
6.1
2.54
2.8±0.5
4.4±0.5
20.0Min.
11.10.14 Rev1 JAS