PL518-1R12 Datasheet, PDF (1/1 Pages) P-tec Corporation – Snap-in Design Requires no Hardware

P-tec Corp.
Tel:[phone]
2405 Commerce Circle Tel:[phone]
Alamosa CO 81101 Fax:[phone]
www.p-tec.net
PL518 Series 5mm LED Snap-in Holder
Features
*Snap-in Design Requires no Hardware
*Mounting Hole 6.35 mm (0.25”)
*Housing Material Black Nylon UL94V-2
*1 Hi-Eff Red LED with Color Diffused
Lens used
*Standard Terminals
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25°C
Reverse Voltage (<100μA)….………………..……...…...………………..………….. 5.0V
Max Forward Current…….…………..………………….……..………….………. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........……..………….. 100mA
Operating Temperature Range………………………………………..…. -25°C to +85°C
Storage Temperature Range……………….....……………………...…. -25°C to +100°C
Soldering Temperature (1.6 mm below body)………....….…………...….. 260°C for 5 seconds
Part Number
Color Diffused Lens
PL518-1R12
Electrical & Optical Characteristics at T_A = 25°C
Emitting
Color
Chip
Material
Peak
Wave
Length
nm
View
Angle
2θ ½
Deg
Forward Voltage Luminous Intensity
@20mA (V)
@20mA (mcd)
Typ Max Min
Typ
Orange-Red
GaAsP
635
50°
2.1
3.0
14.0 24.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
0.8±0.5
3.9±0.5
10.6
0.2 +0.1
4.4±0.5
6.1
Anode
20.0Min.
2.54
11.07.14 Rev1 JAS