PL318-1R12-2_14 Datasheet, PDF (1/1 Pages) P-tec Corporation – Snap-In Panel Mount Indicator

P-tec Corp.
Tel:[phone]
2405 Commerce Circle Tel:[phone]
Alamosa CO 81101 Fax:[phone]
www.p-tec.net
PL318 Series 3mm LED Snap-in Holder
Features
*Snap-In Panel Mount Indicator
*Mounting Hole 4 mm (.156”)
*No mounting Hardware required
*Housing Material Black Nylon UL94V-2
*1 Hi-Eff Red LED with Color Diffused
Lens used
*26AWG 6” (+) Red and (-) Black Wire Leads
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25°C
Power Dissipation……………………………………………………………...…. 78mW
Reverse Voltage (<100 µA).……...…...……..……………………………….………. 5.0V
Max Forward Current…………..………….….…….……..……………………… 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………..…........… 100mA
Operating Temperature Range……………..……………………..….…. -25°C to +85°C
Storage Temperature Range……………..……………….....…….….... -40°C to +100°C
Soldering Temperature (1.6 mm below body)………………….……...… 260°C for 5 seconds
Part Number
6” Wire Leads
Electrical & Optical Characteristics at T_A = 25°C
Emitting
Color
Chip
Material
Peak
Wave
Length
nm
Dominant
Wave
Length
nm
Viewing
Angle
2θ ½
Deg
Forward
Voltage
@20mA (V)
Typ Max
Lumious
Intensity
@20mA (mcd)
Typ Max
PL318-1R12-2
Orange-Red GaAsP 635
626
54° 2.1 2.6 13.0 27.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
1.9±0.5
4.8 3.0
1.0
10.0
3.9
0.2+0.1
4.4±0.5
152.4 ±10mm
6.35
Stripped and Tinned
11.07.14 Rev1 JAS