PL07-WDRG1213 Datasheet, PDF (1/1 Pages) P-tec Corporation – 3mm (T1) Bi-Color LED

P-tec Corp.
2405 Commerce Circle
Alamosa Co. 81101
www.p-tec.net
Tel:[phone]
Tel:[phone]
Fax:[phone]
[e-mail]
PL07 Series 3mm (T1) Bi-Color LED
Features
*Popular T1 3mm Lens Style
with small Flange
*1 Hi-Eff Red and 1 GaP Green
Chip used
*High Intensity
*Low Current Requirement
*Reliable and Rugged
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25°C
Power Dissipation…………………………………………………………………………....… 78mW
Reverse Voltage (<100µA)………..…………...………………………………………………..… 5.0V
Max Forward Current…………..………………..…………………………………….……….. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…………………………….…………. 100mA
Operating Temperature Range…………………………………………………….… -25°C to +85°C
Storage Temperature Range..………….…………………………………………… -40°C to +100°C
Soldering Temperature (1.6mm below body)……………………………………….. 260°C for 5 seconds
Electrical & Optical Characteristics at T_A = 25°C
Part Number
Emitting
Color
Chip
Material
Peak Dominant Viewing
Wave Wave
Angle
Length Length 2θ ½
Forward
Voltage
@20mA (V)
Luminous
Intensity
@20mA (mcd)
White Diffused Lens
nm
nm
Deg Typ Max Min Typ
PL07-WDRG1213
Orange-Red
GaAsP
635
626
Green
GaP
567
572
95°
2.1
2.6
2.1
2.6
8.0
14.0
7.0
12.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads.
4.3
2.9
1.0±0.5
1.02
24.0Min.
Anode Green, YRelelodw, Orange, Red
Anode Red, GrGeernee, nYellow, Orange
2.54 ±0.1
1.5typ.
0.5 Square
3.1
03-08-07 Rev 1 RS