PL07-CDG13 Datasheet, PDF (1/1 Pages) P-tec Corporation – 3mm (T1) LED

P-tec Corporation
2405 Commerce Circle
Alamosa Co. 81101
www.p-tec.net
Tel:[phone]
Tel:[phone]
Fax:[phone]
[e-mail]
PL07 Series 3mm (T1) LED
Features
*Popular 3mm Lens Style
with small Flange
*1 GaP Green Chip used
*Color Diffused Lens with a
Wide Viewing Angle
*High Intensity
*Low Current Requirement
*Reliable and Rugged
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25°C
Power Dissipation……………………………………………………………..…….…... 78mW
Reverse Voltage (<100µA)………..…………...…………………………..……..…..…..…. 5.0V
Max Forward Current…………..………………..……………………….……….…..….. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………….….…..….…… 100mA
Operating Temperature Range…………………………………………….…… -25°C to +85°C
Storage Temperature Range..………….………………….……………......… -40°C to +100°C
Soldering Temperature (1.6mm below body)……………………………...….. 260°C for 5 seconds
Part Number
Color Diffused Lens
Electrical & Optical Characteristics at T_A = 25°C
Emitting
Color
Chip
Material
Peak
Wave
Length
nm
Dominant Viewing Forward
Wave Angle
Voltage
Length 2θ ½ @20mA (V)
nm
Deg Typ Max
Luminous
Intensity
@20mA (mcd)
Min Typ
PL07-CDG13
Green
GaP
567
572
55° 2.1 2.6 10.0 30.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1 mm down the leads.
4.3
2.9
1.0±0.5
1.02
24.0Min.
Anode
2.54 ±0.1
1.5typ.
0.5 Square
3.1
03-07-07 Rev 0 RS