HWW-X072T-065070-H2 Datasheet, PDF (1/5 Pages) P-tec Corporation – X72T RGB LED WALL WASHERS

Page 1 of 5
ATG Electronics® Smart™ X72T RGB LED Wall Washer
USER GUIDE
Part Number
HWW-X072T-065070-H1
HWW-X072T-065070-H2
NOTE:
The purpose of this user guide is to explain the necessary steps for use of Smart™ X72T, and to assure
peak performance of said product. It is intended for use as reference by a fully qualified electrician or
technician. This document should never be considered a substitute for any provision of a regulation or
state or local code.
Please read this entire manual to fully understand and safely use this product.
Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most
recent user guide versions.
GETTING STARTED
This guide contains important information about installing and operating your new Smart™ X72T safely
and properly.
Included in this Box
Smart™ X72T RGB LED Wall Washer, 1 PCs
User Guide, 1 Set
Additional Items Needed
Control System: DynColor™ 500-SL RGB DMX Controller
Signal Amplifier: Master™ 192-SA Signal Amplifier
Unpacking
1) Unpack and carefully examine the product.
2) Report any damage and save all packing materials if any part of the apparatus was damaged durin g
shipping.
3) Do not attempt to use this apparatus if it is damaged.
Cautions
1) W arning: Risk of electric shock! Ensure that the power supply is off when wiring or soldering the device
during installation.
2) The device should be installed and operated by a qualified electrician or technician in accordance with
relevant local codes.
3) Do not use sharp tools near or on the surface of the device.
4) Suggested continuous working time is around 8 hours. Never use for more than 12 consecutive hours.
ATG
Electronics Corp.
Light your world
Color your life!