ET-PKD130B Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Bracket assembly

SPEC
FILE
Bracket assembly
ET-PKD130B
Description
This bracket assembly is used when mounting a Panasonic projector to ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ceiling mount bracket.
Specifications
Dimensions (W × H × D):
Weight:
Applicable ceiling mount bracket
Applicable projector:
378 × 56 × 400 mm (14-7/8 × 2-7/32 × 15-3/4 inches)
Approx. 3.0 kg* (6.61 lbs*)
ET-PKD130H/PKD120H/PKD120S/PKD310H/PKD310S/PKD56H/PKD55S
TY-PKD55S
PT-DZ870K/DZ870W/DZ870LK/DZ870LW/
DW830K/DW830W/DW830LK/DW830LW/DX100K/DX100W/DX100LK/DX100LW
DZ770S/DZ770K/DZ770LS/DZ770LK/
DW740S/DW740K/DW740LS/DW740LK/DX810S/DX810K/DX810LS/DX810LK/
DZ680S/DZ680K/DZ680LS/DZ680LK/
DW640S/DW640K/DW640LS/DW640LK/DX610S/DX610K/DX610LS/DX610LK/
DZ6710/DZ6710L/
DW730S/DW730K/DW730LS/DW730LK/DX800S/DX800K/DX800LS/DX800LK/
DZ6700/DZ6700L/DW6300S/DW6300K/DW6300LS/DW6300LK/
D6000S/D6000K/D6000LS/D6000LK/D5000S/D5000LS
* Average value. May differ depending on models.
Parts
Projector mount bracket (bracket assembly) . . . . 1
Washer-fitted screws (M6 × 16) . . . . . . . . . . . . . . 6
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
400 (15-3/4)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of September 2013
SFL13A001
unit : mm (inch)
NOTE: This illustration is not drawn
to scale.
1/1