WAD150W_14 Datasheet, PDF (3/6 Pages) Power Mate Technology Co., LTD – DC-DC CONVERTER

WAF150W
WAD150W
ENVIRONMENTAL SPECIFICATIONS
Parameter
Conditions
Operating case temperature
Maximum case temperature
Over temperature protection
Storage temperature range
Thermal impedance ⁽¹⁾
Vertical direction by natural convection (20LFM)
Only mount on the iron base-plate
Mount on the iron base-plate and top side with 7G-0058A Heat-sink
Thermal shock
Shock
Vibration
Relative humidity
Min.
-40
-55
Typ.
+100
+110
Max.
+100
+125
U_℃nit
℃℃
2.55
℃/W
2.0
MIL-STD-810F
EN61373, MIL-STD-810F
EN61373, MIL-STD-810F
5% to 95% RH
EMC SPECIFICATIONS
Parameter
EMI ⁽²⁾
ESD
Radiated immunity
Fast transient ⁽³⁾
Surge ⁽³⁾
Conducted immunity
EN55011, EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Conditions
Air ± 8kV and Contact ± 6kV
10 V/m
± 2kV
EN55024 ±1kV and EN50155 ±2kV
10 Vr.m.s
Level
DC-DC module
Class A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Note:
1. (1)The iron base-plate dimension is 19” * 3.5” * 0.063” (The height is EIA standard 2U).
(2)The heat-sink is optional and P/N is 7G-0058A-F.
2. The standard modules meet EMI Class A without external components.
3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: WAF(D)150-24S W : Nippon chemi-con KY series, 470µF/50V.
WAF(D)150-24S W :: Nippon chemi-con KY series, 220µF/100V.
WAF(D)150-110S W : Nippon chemi-con KXJ series, 150µF/200V.
CAUTION: This power module is not internally fused; an input line fuse must always be used. If the load was having sourcing capability (Ex: Battery or
Super Capacitor), an output line fuse must always be used.
CHARACTERISTIC CURVE
WAF(D)150-48S24W Derating Curve (Note 1)
WAF(D)150-48S24W Derating Curve (Note 1)
With Heat-sink
WAF(D)150-48S24W Efficiency vs. Input Voltage
WAF(D)150-48S24W Efficiency vs. Output Load
3
www.PDUKE.com
2014/05/19