LCD30W_14 Datasheet, PDF (3/4 Pages) Power Mate Technology Co., LTD – DC-DC CONVERTER

LCD30W
ENVIRONMENTAL SPECIFICATIONS
Parameter
Conditions
Operating ambient temperature
Without derating
With derating
Maximum case temperature
Over temperature protection
Storage temperature range
Thermal impedance
Vertical direction by natural convection (20LFM)
Without heat-sink
With heat-sink
Thermal shock
Vibration
Relative humidity
EMC SPECIFICATIONS
Parameter
Conditions
EMI ⁽³⁾
EN55022
ESD
EN61000-4-2
Air ± 8kV and Contact ± 6kV
Radiated immunity
Fast transient ⁽⁴⁾
EN61000-4-3
EN61000-4-4
10 V/m
± 2kV
Surge ⁽⁴⁾
EN61000-4-5
± 2kV
Conducted immunity
EN61000-4-6
10 Vr.m.s
Min.
-40
+50
-55
Typ.
115
15.0
13.8
Max. Unit
+50
+100
105
+125
℃
℃℃℃
℃/W
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
Level
Class A, Class B
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Note:
1. Test by minimum input and constant resistive load.
2. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external
resistor between the Trim pin and either +Vout pin or -Vout pin.
3. The standard modules meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE.
4. The external input components are required if the module has to meet EN61000-4-4, EN61000-4-5.
The LCD30-24XXXW recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS
(SMDJ58A, 58V, 3000Watt peak pulse power) to connect in parallel.
The LCD30-48XXXW recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V).
CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
LCD30-48S05W Derating Curve
LCD30-48S05W Derating Curve With Heat-sink
LCD30-48S05W Efficiency vs. Input Voltage
LCD30-48S05W Efficiency vs. Output Load
3
www.PDUKE.com
2014/04/30