QEB75_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 75 WATTS DC-DC CONVERTER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Distributed Power Architectures
Semiconductor Equipment
QEB75 SERIES
75 WATTS DC-DC CONVERTER
FEATURES
• 75 WATTS MAXIMUM OUTPUT POWER
• SINGLE OUTPUT UP TO 25A
• COMPACT 2.28 X 1.45 X 0.50 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• 2:1 WIDE INPUT VOLTAGE RANGE
• FIXED SWITCHING FREQUENCY
• INDUSTRY STANDARD FOOTPRINT
• NO MINIMUM LOAD REQUIRED
• ADJUSTABLE OUTPUT VOLTAGE
• UNDER-VOLTAGE LOCKOUT
• INPUT TO OUTPUT ISOLATION: 1600VDC
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
Positive logic Remote on/off, Pin length
DESCRIPTION
QEB75 single output DC/DC converters provide up to 75 watts of output power in
an industry standard quarter-brick package and footprint. These units are
specifically designed to meet the power needs of low-voltage silicone. All models
feature a wide input range, trimmable output voltage and a 25A current rating.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
Voltage accuracy
Minimum load
Voltage adjustability
(Note 5)
75 Watts, max. _{Input voltage range}
± 1.5%
Input filter
0%
+ 10% , -20% ^{Input surge voltage}
24VDC nominal input
48VDC nominal input
24VDC input
48VDC input
18 ~ 36VDC
36 ~ 75VDC
L-C type
50VDC 100ms, max.
100VDC 100ms, max.
Line regulation
Load regulation
Remote Sense
LL to HL at Full Load
No load to Full Load
(Note 5)
±0.2% _{Start up time}
Nominal input and
constant resistive load
Power up
Remote ON/OFF
±0.3%
10% of Vout(nom) ^{Start-up voltage}
24VDC input
48VDC input
25ms
25ms
18VDC, max.
36VDC, max.
Ripple and noise
20MHz bandwidth
(Measured with a 1µFM/C and a 10µFT/C)
See table ^{Shutdown voltage}
24VDC input
48VDC input
15VDC
32VDC
Temperature coefficient
Transient response recovery time
±0.02% / ºC, max. ^{Remote ON/OFF (Note 6)}
Negative logic(Standard)
25% load step change
200µs
DC-DC ON
DC-DC OFF
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 15V
Over voltage Protection threshold
(Non-latching Hiccup)
Over Current Protection threshold
Short circuit protection
GENERAL SPECIFICATIONS
Positive logic(Option)
120% of Vout(nom) max.
DC-DC ON
DC-DC OFF
110% ~ 140% of Iout Rated ^{Input current of remote control pin Nominal input}
Remote off state input current
Nominal input
Continuous, automatics recovery _{ENVIRONMENTAL SPECIFICATIONS}
Operating base-plate temperature range (Note 7)
Open or 3V < Vr < 15V
Short or 0V < Vr < 1.2V
-0.5~1.0mA
2.5mA
-40ºC ~ +100ºC
Efficiency
See table _{Over temperature protection}
+110ºC
Isolation voltage
Input to Output
1600 VDC, min. 1minute Storage temperature range
Input(Output) to Base-plate 1000 VDC, min. 1minute _{Thermal shock}
Isolation resistance
500VDC
10⁷ ohms, min. _Vibration
Isolation capacitance
2500 pF, max. _{Relative humidity(non-condensing)}
-55ºC ~ +125ºC
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
Switching frequency
270kHz±10% _{EMC CHARACTERISTICS}
Safety approvals
Case material
QEB75-48S1P8
QEB75-48S2P5
QEB75-48S3P3
QEB75-48S05
IEC60950-1 _{EMI (Note 8)}
UL60950-1
EN60950-1 ^{Radiated immunity}
Fast transient (Note 9)
Aluminum base-plate _{Surge (Note 9)}
EN55022
EN61000-4-3
EN61000-4-4
EN61000-4-5
10 V/m
± 2kV
± 1kV
Class A, Class B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Weight (approx)
42g (1.46 oz) Conducted immunity EN61000-4-6 10 Vr.m.s
Perf. Criteria A
MTBF (Note 1) MIL-HDBK-217F
4.632 x 10⁵ hrs
Page 1 of 3
www.pduke.com
2014/4/30