QEB75 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 75 WATTS DC-DC CONVERTER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Distributed Power Architectures
Semiconductor Equipment
QEB75 SERIES
75 WATTS DC-DC CONVERTER
FEATURES
• 75 WATTS MAXIMUM OUTPUT POWER
• SINGLE OUTPUT UP TO 25A
• COMPACT 2.28 X 1.45 X 0.50 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• 2:1 WIDE INPUT VOLTAGE RANGE
• FIXED SWITCHING FREQUENCY
• INDUSTRY STANDARD FOOTPRINT
• NO MINIMUM LOAD REQUIRED
• ADJUSTABLE OUTPUT VOLTAGE
• UNDER-VOLTAGE LOCKOUT
• INPUT TO OUTPUT ISOLATION: 1600VDC
• CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
• SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU
OPTIONS
Positive logic Remote on/off, Pin length
DESCRIPTION
QEB75 single output DC/DC converters provide up to 75 watts of output power in
an industry standard quarter-brick package and footprint. These units are
specifically designed to meet the power needs of low-voltage silicon. All models
feature a wide input range, trimmable output voltage and a 25A current rating.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
Voltage accuracy
Minimum load
Voltage adjustability
Line regulation
Load regulation
Remote Sense
(Note 5)
LL to HL at Full Load
No load to Full Load
(Note 5)
75 Watts, max. _{Input voltage range}
± 1.5%
Input filter
0%
+ 10% , -20% ^{Input surge voltage}
24VDC nominal input
48VDC nominal input
24VDC input
48VDC input
18 ~ 36VDC
36 ~ 75VDC
L-C type
50VDC 100ms, max.
100VDC 100ms, max.
±0.2% _{Start up time}
Nominal input and
constant resistive load
Power up
Remote ON/OFF
±0.3%
10% of Vout(nom) ^{Start-up voltage}
24VDC input
48VDC input
25ms
25ms
18VDC, max.
36VDC, max.
Ripple and noise
20MHz bandwidth
(Measured with a 1µFM/C and a 10µFT/C)
See table ^{Shutdown voltage}
24VDC input
48VDC input
Temperature coefficient
Transient response recovery time
±0.02% / ºC, max. ^{Remote ON/OFF (Note 6)}
Negative logic(Standard)
25% load step change
200µs
DC-DC ON
DC-DC OFF
Over voltage Protection threshold
(Non-latching Hiccup)
Positive logic(Option)
120% of Vout(nom) max.
DC-DC ON
DC-DC OFF
Over Current Protection threshold
Short circuit protection
GENERAL SPECIFICATIONS
110% ~ 140% of Iout Rated ^{Input current of remote control pin Nominal input}
Remote off state input current
Nominal input
Continuous, automatics recovery _{ENVIRONMENTAL SPECIFICATIONS}
Operating base-plate temperature range (Note 7)
Efficiency
See table _{Over temperature protection}
15VDC
32VDC
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 15V
Open or 3V < Vr < 15V
Short or 0V < Vr < 1.2V
-0.5~1.0mA
2.5mA
-40ºC ~ +100ºC
+110ºC
Isolation voltage
Input to Output
1600 VDC, min. 1minute Storage temperature range
Input(Output) to Base-plate 1000 VDC, min. 1minute _{Thermal shock}
Isolation resistance
500VDC
10⁷ ohms, min. _Vibration
Isolation capacitance
2500 pF, max. _{Relative humidity(non-condensing)}
-55ºC ~ +125ºC
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
Switching frequency
270kHz±10% _{EMC CHARACTERISTICS}
Design meets safety standard
IEC60950-1, UL60950-1, EN60950-1 EMI (Note 8)
EN55022
Class A, Class B
Case material
Weight (approx)
MTBF (Note 1)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
Aluminum base-plate ^{Radiated immunity}
42g (1.46 oz) ^{Fast transient (Note 9)}
2.500 x 10⁶ hrs ^{Surge (Note 9)}
4.422 x 10⁵ hrs Conducted immunity
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
10 V/m
± 2kV
± 1kV
10 Vr.m.s
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Page 1 of 3
www.pduke.com
2013/5/3