PMKC03-05S33 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 3 WATTS REGULATED OUTPUT POWER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FEATURES
• 3 WATTS REGULATED OUTPUT POWER
• OUTPUT CURRENT UP TO 600mA
• STANDARD 1.25 X 0.80X 0.40 INCH
• HIGH EFFICIENCY UP TO 80%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SWITCHING FREQUENCY (100KHz, MIN)
• INCLUDE 3.3VDC OUTPUT
• STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
• DUAL SEPARATE OUTPUT
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
SMD TYPE
DESCRIPTION
The PMKC03 series offer 3 watts of output power from a package in an IC
compatible 24pin DIP configuration without derating to 71ºC ambient
temperature. PMKC03 series have 2:1 wide input voltage of 4.5-6, 9-18,
18-36 and 36-75VDC.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
3 Watts, max.
Voltage accuracy
Full load and nominal Vin
± 1%
Minimum load (Note 7)
See table
Line regulation
Load regulation
LL to HL at Full Load _DS
Single
Min Load to Full Load _Dual
DS
3.3Vout
Others
± 0.2%
± 0.5%
± 0.3%
± 0.2%
± 2%
± 2%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
Temperature coefficient
See table
±0.02% / ºC, max.
Transient response recovery time 25% load step change
500μS
Over load protection % of FL at nominal input
180%, typ.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
DS Type, Output to Output
See table
1600VDC, min.
500VDC, min.
10⁹ohms, min.
Isolation capacitance
300pF, max.
Input voltage range
5V nominal input
12V nominal input
24V nominal input
48V nominal input
Input filter
Input surge voltage
100mS max
5V input
12V input
24V input
48V input
Input reflected ripple current Nominal Vin and full load
Start up time
Nominal Vin and
constant resistive load
Power up
ENVIRONMENTAL SPECIFICATIONS
4.5 – 6VDC
9 – 18VDC
18 – 36VDC
36 – 75VDC
Pi type
15VDC
36VDC
50VDC
100VDC
120mAp-p
30mS, typ.
Operating ambient temperature
-25ºC ~ +71ºC(non derating)
Storage temperature range
-55ºC ~ +105ºC
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI
ESD
EN55022
EN61000-4-2
Class A
Air
Contact
± 8KV
± 6KV ^{Perf. Criteria A}
Switching frequency
100KHz, min. ^{Radiated immunity}
EN61000-4-3
10 V/m Perf. Criteria A
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1 ^{Fast transient (Note 6) EN61000-4-4}
± 2KV Perf. Criteria B
Case material
Non-conductive black plastic ^{Surge (Note 6)}
EN61000-4-5
± 1KV Perf. Criteria B
Base material
Non-conductive black plastic ^{Conducted immunity EN61000-4-6}
10 Vr.m.s Perf. Criteria A
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
1.25 X 0.80 X 0.40 Inch
(31.8 X 20.3 X 10.2 mm)
DIP
14g (0.48oz)
SMD
BELLCORE TR-NWT-000332
MIL-HDBK-217F
15g (0.52oz)
3.706 x 10⁶ hrs
3.018 x 10⁶ hrs
Page 1 of 3 Issued Date：2008/05/21