PFKC03-05S33 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 3 WATTS REGULATED OUTPUT POWER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FEATURES
• 3 WATTS REGULATED OUTPUT POWER
• OUTPUT CURRENT UP TO 600mA
• STANDARD 1.25 X 0.80 X 0.40 INCH
• HIGH EFFICIENCY UP TO 80%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SWITCHING FREQUENCY (100KHz, MIN)
• OVER CURRENT PROTECTION
• STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
SMD TYPE
DESCRIPTION
The PFKC03 series offer 3 watts of output power from a package in an IC
compatible 24 pin DIP configuration without derating to 71ºC ambient
temperature and pin to pin compatible to PFKC05, FKC03, FKC05 series.
PFKC03 series have 2:1 wide input voltage of 4.5-6, 9-18, 18-36 and
36-75VDC.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
3 Watts, max.
Voltage accuracy
Full load and nominal Vin
±1%
Minimum load (Note 7)
See table
Line regulation
LL to HL at Full Load
± 0.2%
Single 3.3Vout ^{± 0.3%}
Load regulation
Min. Load to Full Load
Others ± 0.2%
Dual
± 2%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time 25% load step change
500μS
Over load protection % of FL at nominal input
180%, typ.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage Input to Output
Isolation resistance
Standard
Suffix “ H ”
1600VDC, min.
3000VDC, min.
10⁹ohms, min.
Isolation capacitance
300pF, max.
Switching frequency
100KHz, min.
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Non-conductive black plastic
Base material
Non-conductive black plastic
Potting material
Epoxy (UL94-V0)
Dimensions
Weight
MTBF (Note 1)
1.25 X 0.80 X 0.40 Inch
(31.8 X 20.3 X 10.2 mm)
DIP
14g (0.48oz)
SMD
BELLCORE TR-NWT-000332
MIL-HDBK-217F
15g (0.52oz)
3.690 x 10⁶ hrs
3.082 x 10⁶ hrs
INPUT SPECIFICATIONS
Input voltage range
5V nominal input
12V nominal input
24V nominal input
48V nominal input
Input filter
Input surge voltage
100mS max
5V input
12V input
24V input
48V input
Input reflected ripple current Nominal Vin and full load
Start up time
Nominal Vin and
constant resistive load
Power up
4.5 – 6VDC
9 – 18VDC
18 – 36VDC
36 – 75VDC
Pi type
15VDC
36VDC
50VDC
100VDC
120mAp-p
30mS, typ.
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
Storage temperature range
Thermal shock
Vibration
Relative humidity
-25ºC ~ +71ºC(non derating)
-55ºC ~ +105ºC
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
EMC CHARACTERISTICS
EMI
EN55022
ESD
EN61000-4-2
Radiated immunity EN61000-4-3
Fast transient (Note 6) EN61000-4-4
Surge (Note 6)
EN61000-4-5
Conducted immunity EN61000-4-6
Air ^{± 8KV}
Contact ± 6KV
10 V/m
± 2KV
± 1KV
10 Vr.m.s
Class A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Page 1 of 3 Issued Date：2008/05/21