LED15-24S3P3W Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 15 WATTS MAXIMUM OUTPU POWER

FEATURES
• 15 WATTS MAXIMUM OUTPU POWER
• SINGLE OUTPUT UP TO 4A
• SMALL SIZE AND LOW PROFILE：1.10 x 0.94 x 0.34 INCH
• HIGH EFFICIENCY UP TO 87%
• 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
• FIXED SWITCHING FREQUENCY
• INPUT TO OUTPUT ISOLATION (BASIC INSULATION)
• INDUSTRY STANDARD PIN-OUT FEC15 SERIES COMPATIBLE
• SURFACE-MOUNT OR THROUGH-HOLE
• COST EFFICIENT OPEN FRAME DESIGN
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
OPTIONS
Positive logic Remote On/Off, SMD type, Without trim, without On/Off pin
DESCRIPTION
LED15W single output DC/DC converters provide up to 15 watts of output power in
an industry standard package and footprint. These units are specifically designed to
meet the power needs of low profile. All models feature with 4:1 ultra wide input
voltage of 9-36 VDC and 18-75 VDC, comprehensively protected against
over-current, over-voltage and input under-voltage protection conditions, and
trimmable output voltage.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
15 Watts Input voltage range
24V nominal input
48V nominal input
9 – 36VDC
18 – 75VDC
Voltage accuracy
Full load and nominal Vin
Minimum load
Voltage adjustability (Note 6)
Line regulation
LL to HL at Full Load
Load regulation
No Load to Full Load
± 1% ^{Input surge voltage}
24V input
100mS max
48V input
0%
±10%
± 0.2%
Input reflected ripple
current
Nominal Vin and full load
Start up time
Nominal Vin and
Power up
constant resistive load Remote ON/OFF
± 0.2% ^{Start-up voltage}
24V input
48V input
50VDC
100VDC
30mAp-p
30mS, max.
30mS, max.
9VDC
18VDC
Ripple and noise
20MHz bandwidth
(Measured with a 1μF M/C and a 10μFT/C)
See table ^{Shutdown voltage}
24V input
48V input
Remote ON/OFF (Note 7)
Temperature coefficient
±0.02% / ºC, max. _{Positive logic(Option) DC-DC ON}
8VDC
16VDC
Open or 3 V < Vr < 15V
Transient response recovery time 25% load step change
250μS
Negative logic(Standard)
DC-DC OFF
DC-DC ON
3.3V output
3.7VDC-5.4VDC
DC-DC OFF
Over voltage protection
5V output
5.6VDC-7.0VDC _{Input current of remote control pin}
Nominal Vin
(Voltage clamped)
12V output
15V output
13.8VDC-17.5VDC
16.8VDC-20.5VDC
Remote off state input current
Nominal Vin
Over load protection
% of FL at nominal input
150%,typ. ^{ENVIRONMENTAL SPECIFICATIONS}
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 15V
-0.5mA~1.0mA
2.5 mA
Short circuit protection
Hiccup, automatics recovery ^{Operating ambient temperature}
-40℃ to +85℃ (with derating)
GENERAL SPECIFICATIONS
Storage temperature range
-55ºC ~ +125ºC
Efficiency
See table Thermal shock
MIL-STD-810F
Isolation voltage Input to Output (Basic Insulation) 2250VDC, min. Vibration
Isolation resistance
10⁹ohms, min. _{Relative humidity}
Isolation capacitance
Switching frequency
3.3V,5V
12V,15V
1500pF, max. _{EMC CHARACTERISTICS}
350KHz
400KHz
EMI (Note 8)
EN55022
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1 Radiated immunity EN61000-4-3
Dimensions
1.10 X 0.94 X 0.34 Inch
(27.9 X 23.9 X 8.5 mm)
Fast transient (Note 9)
EN61000-4-4
Weight
MTBF (Note 1)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
10.5g(0.36oz) Surge (Note 9)
1.322x10⁶hrs
5.147x10⁵hrs
Conducted immunity
EN61000-4-5
EN61000-4-6
MIL-STD-810F
5% to 95% RH
10 V/m
± 2KV
± 1KV
3 Vr.m.s
Class A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Page 1 of 3 Issued Date：2008/05/21