HEC100_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 100 WATTS DC-DC CONVERTER

HEC100 SERIES
100 WATTS DC-DC CONVERTER
FEATURES
• 100 WATTS MAXIMUM OUTPUT POWER
• SINGLE: OUTPUT CURRENT UP TO 25A
DUAL: TOTAL OUTPUT POWER UP TO 100W
• COMPACT 2.40 X 2.28 X 0.50 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• INPUT RANGE FROM 36VDC TO 75VDC
• FIXED SWITCHING FREQUENCY(300kHz)
• HALT TESTED
• INDUSTRY STANDARD FOOTPRINT
• ADJUSTABLE OUTPUT VOLTAGE
• INPUT TO OUTPUT BASIC INSULATION: 1600 VDC
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
Single
Dual
Positive and Negative remote on/off, pin length
DESCRIPTION
HEC100-SERIES DC/DC converters provide up to 100 watts of output power in an
APPLICATIONS
Wireless Network
industry standard half-brick package and footprint. All models feature a wide input
range, adjustable output voltage and a 25A current rating.
Telecom/Datacom
Industry Control System
Distributed Power Architectures
Semiconductor Equipment
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
Total output power
Voltage accuracy
Single
Dual
Minimum load
Voltage adjustability
Single (Note 5)
Dual for Each output
Line regulation
LL to HL at FL
Load regulation
Single( No Load to Full Load )
Dual( No Load to Full Load )
Dual for each output
Remote sense (Note 5) Single
Ripple and noise
20MHz bandwidth (Note 6)
Temperature coefficient
100 Watts, max.
± 1.5%
± 1.0%
0%
+ 10% , -20%
± 10%
See table
See table
10% of Vout(nom)
100mVp-p
±0.02% / ºC, max.
INPUT SPECIFICATIONS
Input voltage range
36 ~ 75VDC
Input filter
L-C type
Input surge voltage
100VDC 100mS, max.
Start
up time
Nominal input and
constant resistive load
UVLO Start-up voltage
UVLO Shutdown voltage
Single, Dual Power up
Single Remote ON/OFF
Single
Dual
Single
Dual
25ms
25ms
34VDC
35VDC
32VDC
33VDC
OVLO start-up voltage
Dual
76.5VDC
OVLO shutdown voltage
Dual
78.5VDC
Input reflected ripple current
Single
20mAp-p
Transient response recovery time 25% load step change
200µs
Over voltage protection Single (Hiccup)
115% ~ 130% of Vout(nom)
threshold
Dual
2.5VDC
3.0VDC
3.3VDC
3.9VDC
5VDC
6.2VDC
Over current protection threshold
Single
Dual
110% ~ 140% of Iout Rated
110% ~ 120% of Iout Rated
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
Input(Output) to Case
Single
Dual
500VDC
See table
1600 VDC, min. 1minute
1000 VDC, min. 1minute
10⁷ohms, min.
10⁹ohms, min.
Isolation capacitance
Single
Dual
2500pF, max.
1500pF, max.
Switching frequency
300kHz±10%
Safety approvals
(Single Output)
IEC60950-1, UL60950-1, & EN60950-1
Remote ON/OFF (Note 7)
Single—
(Negative logic)
(Positive logic)
Dual—
ON=Short or 0V < Vr < 1.2V, IIN=1mA max.
OFF=Open or 3V < Vr < 15V, IIN=50µA max.
ON=Open or 3V < Vr < 15V, IIN=50µA max.
OFF=Short or 0V < Vr < 1.2V, IIN=1mA max.
(Positive logic)
ON=Open or 3V < Vr < +Vin
OFF=Short or Vr < 1.2V
(Negative logic)
ON= Short or Vr < 1.2V
OFF=Open or 3V < Vr < +Vin
Input current of remote control pin Nominal input
-0.5mA ~ 0.5mA
Remote off state input current
Nominal input
20mA
ENVIRONMENTAL SPECIFICATIONS
Operating base-plate temperature range (Note 8)
-40ºC ~ +100ºC
Over
temperature
protection
Single
Dual for
base
plate
110ºC
105ºC
Humidity max, Non-condensing
95%
Storage temperature range
-55ºC ~ +125ºC
Thermal shock
MIL-STD-810F
Case material
Base material
Potting material
Weight
MTBF (Note 1)
Dual
Dual
Single
Dual
MIL-HDBK-217F
Non-conductive black plastic
Aluminum base-plate
Silicone (UL94 V-0)
65g (2.29oz)
105g (3.70oz)
4.353 x 10⁵ hrs
Vibration
EMC CHARACTERISTICS
EMI (Note 9)
EN55022
Radiated immunity
EN61000-4-3
Fast transient (Note 10) EN61000-4-4
MIL-STD-810F
Class A, Class B
10 V/m Perf. Criteria A
± 2kV Perf. Criteria B
Surge (Note 10)
EN61000-4-5
± 1kV Perf. Criteria B
Conducted immunity
EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3
www.pduke.com
2014/5/6