HEC100-48S1P8 Datasheet, PDF (1/4 Pages) Power Mate Technology Co., LTD – 100 WATTS MAXIMUM OUTPUT POWER

Single
Dual
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Distributed Power Architectures
Semiconductor Equipment
FEATURES
• 100 WATTS MAXIMUM OUTPUT POWER
• SINGLE : OUTPUT CURRENT UP TO 25A
DUAL : TOTAL OUTPUT POWER UP TO 100W
• COMPACT 2.40 X 2.28 X 0.50 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• INPUT RANGE FROM 36VDC TO 75VDC
• FIXED SWITCHING FREQUENCY(300KHz)
• HALT TESTED
• INDUSTRY STANDARD FOOTPRINT
• ADJUSTABLE OUTPUT VOLTAGE
• INPUT TO OUTPUT ISOLATION (BASIC INSULATION)
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• SINGLE :UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• DUAL:DESIGN MEET UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
Remote On/Off, Pin length
DESCRIPTION
HEC100-SERIES DC/DC converters provide up to 100 watts of output power in an
industry standard half-brick package and footprint. All models feature a wide input
range, trimmable output voltage and a 25A current rating.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
Total output power
100 Watts, max.
Voltage accuracy
Full load and Single
nominal Vin Dual
± 1.5%
± 1.0%
Minimum load
0%
Voltage adjustability
Single (Note 5)
Dual for Each output
+ 10% , -20%
± 10%
Line regulation
LL to HL at FL
See table
Single( No Load to Full Load )
Load regulation
Dual( No Load to Full Load )
See table
Dual for each output
Remote sense (Note 5) Single
10% of Vout
Ripple and noise 20MHz bandwidth (Note 6)
100mVp-p
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time 25% load step change
200μS
Over voltage protection Single (Hiccup)
threshold
Dual
115% ~ 130% of Vout
2.5V
3.3V
5V
3.0VDC
3.9VDC
6.2VDC
Over current protection threshold
Single
Dual
110% ~ 140% of Iout Rated
110% ~ 120% of Iout Rated
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input to Output
Input to Case
1600 VDC, min.
1000 VDC, min.
Isolation resistance
Output to Case
Single
Dual
1000 VDC, min.
10⁷ohms, min.
10⁹ohms, min.
Isolation capacitance
Single
Dual
2500pF, max.
1500pF, max.
Switching frequency
300KHz, typ.
Approvals and standard Single
IEC60950-1, UL60950-1, EN60950-1
Design meets standard Dual
IEC60950-1, UL60950-1, EN60950-1
Case material
Dual
Non-conductive black plastic
Base material
Aluminum base-plate
Potting material
Dual
Silicon (UL94-V0)
Weight
MTBF (Note 1)
Single
Dual
BELLCORE TR-NWT-000332
MIL-HDBK-217F
Single
Dual
Single
Dual
65g (2.29oz)
105g (3.70oz)
2.000 x 10⁶ hrs
1.004 x 10⁶ hrs
2.144 x 10⁵ hrs
7.740 x 10⁴ hrs
INPUT SPECIFICATIONS
Input voltage range
36 – 75VDC
Input filter
L-C type
Input surge voltage 100mS max (Single)
100VDC
Start up time
Nominal Vin and
constant resistive load
UVLO Start-up voltage
UVLO Shutdown voltage
Single, Dual Power up
Single Remote ON/OFF
Single
Dual
Single
Dual
25mS, typ.
25mS, typ.
34VDC
35VDC
32VDC
33VDC
OVLO start-up voltage
Dual
76.5VDC, typ.
OVLO shutdown voltage
Dual
78.5VDC, typ.
Input reflected ripple current
Single
20mAp-p
Remote ON/OFF (Note 7)
Single—
(Negative logic)
ON=Short or 0V < Vr < 1.2V, I_IN=1mA max.
OFF=Open or 3V < Vr < 15V, I_IN=50μA max.
(Positive logic)
ON=Open or 3V < Vr < 15V, IIN=50μA max.
OFF=Short or 0V < Vr < 1.2V, IIN=1mA max.
Dual—
(Positive logic)
ON=Open or 3V < Vr < +Vin
OFF=Short or Vr < 1.2V
(Negative logic)
ON= Short or Vr < 1.2V
OFF=Open or 3V < Vr < +Vin
Input current of remote control pin Nominal Vin
-0.5mA ~ 0.5mA
Remote off state input current
Nominal Vin
20mA
ENVIRONMENTAL SPECIFICATIONS
Operating base-plate temperature range (Note 8)
Over
temperature
protection
Single
Dual for
base
plate
-40ºC to +100ºC
(with derating)
110ºC
105ºC
Humidity max, Non-condensing
95%
Storage temperature range
-55ºC to +125ºC
Thermal shock
MIL-STD-810F
Vibration
EMC CHARACTERISTICS
EMI (Note 9)
EN55022
MIL-STD-810F
Class A
Radiated immunity
Fast transient (Note 10)
Surge (Note 10)
EN61000-4-3
EN61000-4-4
EN61000-4-5
10 V/m
± 2KV
± 1KV
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Conducted immunity
EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 4 Issued Date：2008/05/21