FED30_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 30 WATTS DC-DC CONVERTER

FED30 SERIES
30 WATTS DC-DC CONVERTER
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement
Semiconductor Equipment
FEATURES
• 30 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 8.5A
• STANDARD 2.00 X 1.00 X 0.40 INCH
• HIGH EFFICIENCY UP TO 91%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
NEGATIVE LOGIC REMOTE ON/OFF
DESCRIPTION
The FED30 series offer 30 watts of output power from a 2 x 1 x 0.4 inch
package. FED30 series have 2:1 wide input voltage of 9~18VDC, 18~36 and
36~75VDC. The FED30 series have features 1600VDC of isolation, short circuit
protection, over-current protection, over-voltage protection, over-temperature
protection and six sided shielding.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
30 Watts max.
Voltage accuracy
±1%
Voltage adjustability Single output
± 10%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No load to Full load
Single
Dual
± 0.5%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
1.5-5.1Vo 100mVp-p
(Measured with a 1uF/50V MLCC) 12-15Vo 150mVp-p
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time
25% load step change 250µs
1.5V
2.5V
Over voltage protection ^3.3V
Zener diode clamp
5.0V & 5.1V & ±5V
12V & ±12V
15V & ±15V
Output
Output
Output
Output
Output
Output
2.0V
3.3V
3.9V
6.2V
15V
18V
Over load protection % of FL at nominal input
150%
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input to Output
Input (Output) to Case
1600VDC min. 1minute
1600VDC min. 1minute
Case grounding
Connect case to –input with decoupling Y Cap
Isolation resistance 500VDC
10⁹ohms, min.
Isolation capacitance
1500pF, max.
Switching frequency
430kHz± 10%
Safety approvals
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Dimensions
Weight
MTBF (Note 1)
MIL-HDBK-217F
Epoxy (UL94 V-0)
2.00 X 1.00 X 0.40 Inch
(50.8X 25.4 X 10.2 mm)
30.5g(1.07oz)
1.453 x 10⁶ hrs.
INPUT SPECIFICATIONS
12VDC nominal input
9 ~ 18VDC
Input voltage range
24VDC nominal input
48VDC nominal input
18 ~ 36VDC
36 ~ 75VDC
Input filter
Pi type
Input surge voltage
12VDC input
24VDC input
48VDC input
25VDC 100ms, max.
50VDC 100ms, max.
100VDC 100ms, max.
Input reflected ripple current
20mAp-p
Start up time
Nominal input and
Power up
constant resistive load Remote ON/OFF
30ms
30ms
Start-up voltage
Shutdown voltage
12VDC input
24VDC input
48VDC input
12VDC input
24VDC input
48VDC input
9VDC, max.
18VDC, max.
36VDC, max.
8VDC
16VDC
32VDC
Remote ON/OFF (Note 5)
(Positive logic)(Standard) DC-DC ON
Open or 3V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)(Option) DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3V < Vr < 12V
Input current of Remote control pin
Nominal Input -0.5mA ~ +0.5mA
Remote off state input current
Nominal Input
3mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC to +50ºC (without derating)
+50ºC to +85ºC (with derating)
Maximum case temperature
105ºC
Storage temperature range
-55ºC to +125ºC
Over temperature protection
115ºC
Thermal impedance
(Note 6)
Nature convection
Nature convection with heat-sink
12ºC/Watt
10ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 7)
ESD
Radiated immunity
EN55022
EN61000-4-2
EN61000-4-3
Class A, Class B
Air
Contact
± 8kV
± 6kV
Perf. Criteria A
10 V/m Perf. Criteria A
Fast transient (Note 8) EN61000-4-4
± 2kV Perf. Criteria A
Surge (Note 8)
EN61000-4-5
± 1kV Perf. Criteria A
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3
www.pduke.com
2014/4/30