FED30W_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 30 WATTS DC-DC CONVERTER

FED30W SERIES
30 WATTS DC-DC CONVERTER
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement
Semiconductor Equipment
FEATURES
• 30 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 8.5A
• STANDARD 2.00 X 1.00 X 0.40 INCH
• HIGH EFFICIENCY UP TO 91%
• 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
NEGATIVE LOGIC REMOTE ON/OFF
DESCRIPTION
The FED30W series offer 30 watts of output power from a 2 x 1 x 0.4 inch
package. FED30W series have 4:1 ultra wide input voltage of 9~36 and
18~75VDC. The FED30W have features 1600VDC of isolation, short circuit
protection, over-current protection, over-voltage protection,
over-temperature protection and six sided shielding.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
30 Watts max.
Voltage accuracy
±1%
Voltage adjustability Single output
± 10%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No load to Full load
Single
Dual
± 0.5%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
1.5-5.1Vo 100mVp-p
(Measured with a 1uF/50V MLCC) 12-15Vo 150mVp-p
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time
25% load step change
1.5V
2.5V
Over voltage protection ^3.3V
Zener diode clamp
5.0V & 5.1V & ±5V
12V & ±12V
15V & ±15V
Output
Output
Output
Output
Output
Output
250µs
2.0V
3.3V
3.9V
6.2V
15V
18V
Over load protection % of FL at nominal input
150%
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input to Output
Input (Output) to Case
1600VDC min. 1minute
1600VDC min. 1minute
Case grounding
Connect case to -input with decoupling Y Cap
Isolation resistance 500VDC
10⁹ohms, min.
Isolation capacitance
1500pF, max.
Switching frequency
430kHz± 10%
Safety approvals
IEC60950-1, UL60950-1, & EN60950-1
Case material
Base material
Potting material
Dimensions
Weight
MTBF (Note 1)
MIL-HDBK-217F
Nickel-coated copper
FR4 PCB
Epoxy (UL94 V-0)
2.00 X 1.00 X 0.40 Inch
(50.8X 25.4 X 10.2 mm)
30.5g(1.07oz)
1.288 x 10⁶ hrs.
INPUT SPECIFICATIONS
Input voltage range
24VDC nominal input
48VDC nominal input
9 ~ 36VDC
18 ~ 75VDC
Input filter
Pi type
Input surge voltage
24VDC input
48VDC input
50VDC 100ms, max.
100VDC 100ms, max.
Input reflected ripple current
20mAp-p
Start up time
Nominal input and
constant resistive load
Start-up voltage
24VDC input
48VDC input
Shutdown voltage
24VDC input
48VDC input
Remote ON/OFF (Note 5)
(Positive logic)(Standard) DC-DC ON
DC-DC OFF
(Negative logic)(Option) DC-DC ON
DC-DC OFF
Power up
Remote ON/OFF
30ms
30ms
9VDC, max.
18VDC, max.
8VDC
16VDC
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 12V
Input current of Remote control pin Nominal Input -0.5mA ~ +0.5mA
Remote off state input current
Nominal Input
3mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC to +50ºC (without derating)
+50ºC to +85ºC (with derating)
Maximum case temperature
105ºC
Storage temperature range
-55ºC to +125ºC
Over temperature protection
115ºC
Thermal impedance
Nature convection
12ºC/Watt
(Note 6)
Nature convection with heat-sink
10ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
Relative humidity
MIL-STD-810F
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 7)
ESD
EN55022
EN61000-4-2
Air
Contact
± 8kV
± 6kV
Class A
Perf. Criteria A
Radiated immunity EN61000-4-3
10 V/m Perf. Criteria A
Fast transient (Note 8) EN61000-4-4
± 2kV Perf. Criteria A
Surge (Note 8)
EN61000-4-5
± 1kV Perf. Criteria A
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3
www.pduke.com
2014/4/30