FED30-24S1P5W Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 30 WATTS OUTPUT POWER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement
Semiconductor Equipment
FEATURES
• 30 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 8.5A
• STANDARD 2.00 X 1.00 X 0.40 INCH
• HIGH EFFICIENCY UP TO 91%
• 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 89/336 EEC
• DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
Negative logic Remote On/Off
DESCRIPTION
The FED30W series offer 30 watts of output power from a 2 x 1 x 0.4 inch
package. FED30W series have 4:1 ultra wide input voltage of 9-36 and
18-75VDC. The FED30W have features 1600VDC of isolation, short circuit
protection, over-current protection, over-voltage protection, over-temperature
protection and six sided shielding.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
30 Watts max.
Voltage accuracy
Full load and nominal Vin
±1%
Voltage adjustability Single output
± 10%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No load to Full load
Single
Dual
± 0.5%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
1.5-5.1Vo 100mVp-p
(Measured with a 1uF/50V MLCC) 12-15Vo 150mVp-p
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time
25% load step change
1.5V
2.5V
Over voltage protection ^3.3V
Zener diode clamp
5.0V & 5.1V & ±5V
12V & ±12V
Output
Output
Output
Output
Output
15V & ±15V
Output
250μS
2.0V
3.3V
3.9V
6.2V
15V
18V
Over load protection % of FL at nominal input
150%, typ.
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Input to Output
Input (Output) to Case
See table
1600VDC, min.
1600VDC, min.
Case grounding
Isolation resistance
Connect case to -Vin with decoupling Y Cap
10⁹ohms, min.
Isolation capacitance
1500pF, max.
Switching frequency
430KHz,typ.
Design meets safety standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 1.00 X 0.40 Inch
(50.8X 25.4 X 10.2 mm)
30.5g(1.07oz)
BELLCORE-TR-NWT-000332
MIL-HDBK-217F
3.163 x 10⁶ hrs.
4.347 x 10⁵ hrs.
INPUT SPECIFICATIONS
Input voltage range
24V nominal input
48V nominal input
9 – 36VDC
18 – 75VDC
Input filter
Pi type
Input surge voltage
100mS max
24V input
48V input
50VDC
100VDC
Input reflected ripple current Nominal Vin and full load
20mAp-p
Start up time
Nominal Vin and
Power up
30mS, typ.
constant resistive load Remote ON/OFF 30mS, typ.
Start-up voltage
24V input
48V input
9VDC
18VDC
Shutdown voltage
24V input
48V input
Remote ON/OFF (Note 6)
(Positive logic)(Standard) DC-DC ON
DC-DC OFF
(Negative logic)(Option) DC-DC ON
DC-DC OFF
8VDC
16VDC
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 12V
Input current of Remote control pin
Nominal Vin -0.5mA ~ +0.5mA
Remote off state input current
Nominal Vin
3mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC to +50ºC (without derating)
+50ºC to +85ºC (with derating)
Maximum case temperature
105ºC
Storage temperature range
-55ºC to +125ºC
Over temperature protection
115ºC, typ
Thermal impedance
Nature convection
12ºC/Watt
(Note 7)
Nature convection with heat-sink
10ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 8)
ESD
EN55022
EN61000-4-2
Class A
Air
Contact
± 8KV
± 6KV
Perf. Criteria A
Radiated immunity EN61000-4-3
Fast transient (Note 9) EN61000-4-4
Surge (Note 9)
EN61000-4-5
10 V/m Perf. Criteria A
± 2KV Perf. Criteria A
± 1KV Perf. Criteria A
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3 Issued Date：2008/07/11