FED30-12S1P5 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 30 WATTS OUTPUT POWER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement
Semiconductor Equipment
FEATURES
• 30 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 8.5A
• STANDARD 2.00 X 1.00 X 0.40 INCH
• HIGH EFFICIENCY UP TO 91%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 89/336 EEC
• DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
Negative logic Remote On/Off
DESCRIPTION
The FED30 series offer 30 watts of output power from a 2 x 1 x 0.4 inch
package. FED30 series have 2:1 wide input voltage of 9-18 and 18-36 and
36-75VDC. The FED30 series have features 1600VDC of isolation, short circuit
protection, over-current protection, over-voltage protection, over-temperature
protection and six sided shielding.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
30 Watts max.
Voltage accuracy
Full load and nominal Vin
±1%
Voltage adjustability Single output
± 10%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No load to Full load
Single
Dual
± 0.5%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
1.5-5.1Vo 100mVp-p
(Measured with a 1uF/50V MLCC) 12-15Vo 150mVp-p
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time
25% load step change
1.5V
2.5V
Over voltage protection ^3.3V
Zener diode clamp
5.0V & 5.1V & ±5V
12V & ±12V
Output
Output
Output
Output
Output
15V & ±15V
Output
250μS
2.0V
3.3V
3.9V
6.2V
15V
18V
Over load protection % of FL at nominal input
150%, typ.
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input to Output
Input (Output) to Case
1600VDC, min.
1600VDC, min.
Case grounding
Connect case to -Vin with decoupling Y Cap
Isolation resistance
10⁹ohms, min.
Isolation capacitance
1500pF, max.
Switching frequency
430KHz, typ.
Design meets safety standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 1.00 X 0.40 Inch
(50.8X 25.4 X 10.2 mm)
30.5g(1.07oz)
BELLCORE-TR-NWT-000332
MIL-HDBK-217F
3.173 x 10⁶ hrs.
5.548 x 10⁵ hrs.
INPUT SPECIFICATIONS
Input voltage range
12V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
Input filter
Pi type
Input surge voltage
100mS max
12V input
24V input
48V input
25VDC
50VDC
100VDC
Input reflected ripple current Nominal Vin and full load
20mAp-p
Start up time
Nominal Vin and
constant resistive load
12V input
Start-up voltage
24V input
48V input
12V input
Shutdown voltage
24V input
48V input
Power up
30mS, typ.
Remote ON/OFF 30mS, typ.
9VDC
18VDC
36VDC
8VDC
16VDC
32VDC
Remote ON/OFF (Note 6)
(Positive logic)(Standard)
(Negative logic)(Option)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 12V
Input current of Remote control pin
Nominal Vin -0.5mA ~ +0.5mA
Remote off state input current
Nominal Vin
3mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC to +50ºC (without derating)
+50ºC to +85ºC (with derating)
Maximum case temperature
105ºC
Storage temperature range
-55ºC to +125ºC
Over temperature protection
115ºC, typ.
Thermal impedance
Nature convection 12ºC/Watt
(Note 7)
Nature convection with heat-sink 10ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 8)
ESD
Radiated immunity
EN55022
EN61000-4-2
EN61000-4-3
Air
Contact
± 8KV
± 6KV
10 V/m
Class A
Perf. Criteria A
Perf. Criteria A
Fast transient (Note 9) EN61000-4-4
± 2KV Perf. Criteria A
Surge (Note 9)
EN61000-4-5
± 1KV Perf. Criteria A
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
VER:00 Page 1 of 3 Issued Date：2008/07/11