FED20-12S1P5 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 20 WATTS MAXIMUM OUTPUT POWER

FEATURES
• 20 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 6A
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 89%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
OPTIONS
Negative logic Remote On/Off
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FED20 series offer 20 watts of output power from a 2 x 1 x 0.4 inch
package. The FED20 series with 2:1 wide input voltage of 9-18, 18-36
and 36-75VDC and features 1600VDC of isolation, short-circuit and
over-voltage protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
20 Watts, max.
Voltage accuracy
Full load and nominal Vin
± 1%
Minimum load
0%
Voltage adjustability Single output
± 10%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No Load to Full Load
± 0.5%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
(Measured with a 0.1μF/50V MLCC)
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time 25% load step change
1.5V output
1.8V output
Over voltage protection
Zener diode clamp
2.5V output
3.3V output
5V output
12V output
15V output
Over load protection % of FL at nominal input
250μS
3.9VDC
3.9VDC
3.9VDC
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
INPUT SPECIFICATIONS
Input voltage range
12V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
Input filter
L-C type
Input surge voltage
100mS max
12V input
24V input
48V input
36VDC
50VDC
100VDC
Input reflected ripple current Nominal Vin and full load
20mAp-p
Start up time
Nominal Vin and
Power up
constant resistive load Remote ON/OFF
10mS, typ.
10mS, typ.
Remote ON/OFF (Note 6)
(Positive logic)(Standard) DC-DC ON
Open or 3V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)(Option)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3V < Vr < 12V
Input current of remote control pin Nominal Vin
-0.5mA ~ +0.5mA
Remote off state input current
Nominal Vin
2.5mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
100ºC
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
Input(Output) to case
See table
1600VDC, min.
1600VDC, min.
10⁹ohms, min.
Storage temperature range
-55ºC ~ +105ºC
Thermal impedance (Note 7)
Nature convection
Nature convection with heat-sink
12ºC/Watt
10ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Isolation capacitance
1000pF, max. Relative humidity
5% to 95% RH
Switching frequency
500KHz, typ.
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
27g (0.95oz)
1.791 x 10⁶ hrs
6.842 x 10⁵ hrs
EMC CHARACTERISTICS
EMI (Note 8)
EN55022
ESD
EN61000-4-2
Radiated immunity EN61000-4-3
Fast transient (Note 9) EN61000-4-4
Surge (Note 9)
EN61000-4-5
Conducted immunity EN61000-4-6
Air
Contact
± 8KV
± 6KV
10 V/m
Class A
Perf. Criteria B
Perf. Criteria A
± 2KV Perf. Criteria A
± 1KV Perf. Criteria B
10 Vr.m.s Perf. Criteria A
Page 1 of 3 Issued Date：2008/05/21