FEC60_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 60 WATTS DC-DC CONVERTER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FEC60 SERIES
60 WATTS DC-DC CONVERTER
FEATURES
• 60 WATTS MAXIMUM OUTPUT POWER
• SINGLE OUTPUT UP TO 14A
• STANDARD 2.0 X 2.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• APPROVED FOR BASIC INSULATION
• NO MINIMUM LOAD REQUIRED
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
Negative logic Remove On/Off
DESCRIPTION
The FEC60 series offer 60 watts of output power from a 2.00 x 2.00 x 0.4 inch
package. The FEC60 series with 2:1 wide input voltage of 18~36VDC and
36~75VDC and features 1600VDC of isolation, short-circuit and over-voltage
protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
60 Watts, max.
Voltage accuracy
± 1%
Minimum load
0%
Voltage adjustability (Note 6)
24Vout
Others
+ 20% -10%
±10%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No Load to Full Load
± 0.5%
Ripple and noise
20MHz bandwidth
Temperature coefficient
Transient response
recovery time
25% load step change
3.3VDC output
Over voltage protection
(Voltage clamped)
5VDC output
12VDC output
15VDC output
24VDC output
Over load protection % of FL at nominal input
See table
±0.02% / ºC, max.
250µs
3.7VDC~5.4VDC
5.6VDC~7.0VDC
13.8VDC~17.5VDC
16.8VDC~20.5VDC
30.0VDC~33.0VDC
150%, max.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage Input to Output
(Basic insulation) Input(Output) to Case
Case grounding
Isolation resistance 500VDC
See table
1600 VDC, min. 1minute
1600 VDC, min. 1minute
Connect case to -INPUT
with decoupling Y Cap
10⁹ohms, min.
Isolation capacitance
1500pF, max.
INPUT SPECIFICATIONS
Input voltage range
24VDC nominal input
48VDC nominal input
18 ~ 36VDC
36 ~ 75VDC
Input filter
Pi type
Input surge voltage
24VDC input
48VDC input
50VDC 100ms, max.
100VDC 100ms, max.
Input reflected ripple
current
20mAp-p
Start up time
Nominal input and
Power up
20ms, max.
constant resistive load Remote ON/OFF 20ms, max.
Start-up voltage
24VDC input
48VDC input
17VDC
34VDC
Shutdown voltage
24VDC input
48VDC input
15VDC
32VDC
Remote ON/OFF (Note 7)
Positive logic (standard)
Negative logic (option)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 12V
Input current of Remote control pin Nominal input
-0.5mA~1.0mA
Remote off state input current
Nominal input
4mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature (Note8)
-40ºC ~ +40ºC (without derating)
+40ºC ~ +110ºC (with derating)
Maximum case temperature
+110ºC
Storage temperature range
-55ºC ~ +125ºC
Over temperature protection
+120ºC
Thermal impedance (Note 9)
Without Heat-sink
With Heat-sink
10.5ºC/Watt
8.4ºC/Watt
Thermal shock
MIL-STD-810F
Switching frequency
Safety approvals
Case material
Base material
Potting material
Dimensions
Weight
MTBF (Note 1)
300kHz±10%
IEC60950-1, UL60950-1, & EN60950-1
Nickel-coated copper
FR4 PCB
Epoxy (UL94 V-0)
2.00 X 2.00 X 0.40 Inch
(50.8 X 50.8 X 10.2 mm)
60g (2.11oz)
MIL-HDBK-217F
4.089 x 10⁵ hrs
Vibration
Relative humidity
EMC CHARACTERISTICS
EMI (Note 10)
EN55022
ESD
EN61000-4-2
Radiated immunity EN61000-4-3
Fast transient (Note 11) EN61000-4-4
Surge (Note 11)
EN61000-4-5
MIL-STD-810F
5% to 95% RH
Air
Contact
Class A, Class B
± 8kV
± 6kV
Perf. Criteria A
10 V/m Perf. Criteria A
± 2kV Perf. Criteria A
± 1kV Perf. Criteria A
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3
www.pduke.com
2014/4/30