FEC60-24S3P3 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 60 WATTS MAXIMUM OUTPUT POWER

FEATURES
• 60 WATTS MAXIMUM OUTPUT POWER
• SINGLE OUTPUT UP TO 14A
• STANDARD 2.0 X 2.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• APPROVED FOR BASIC INSULATION
• NO MINIMUM LOAD REQUIRED
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
Telecom/Datacom
OPTIONS
Negative logic Remove On/Off
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FEC60 series offer 60 watts of output power from a 2.00 x 2.00 x 0.4 inch
package. The FEC60 series with 2:1 wide input voltage of 18-36VDC and
36-75VDC and features 1600VDC of isolation, short-circuit and over-voltage
protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
60 Watts, max.
Voltage accuracy
FL and nominal Vin
± 1%
Minimum load
0%
Voltage adjustability (Note 6)
± 10%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No Load to Full Load
Temperature coefficient
Transient response
recovery time
25% load step change
3.3V output
Over voltage protection 5V output
(Voltage clamped)
12V output
15V output
Over load protection % of FL at nominal input
± 0.5%
±0.02% / ºC, max.
250μS
3.7VDC-5.4VDC
5.6VDC-7.0VDC
13.8VDC-17.5VDC
16.8VDC-20.5VDC
150%, max.
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
(Basic insulation)
Case grounding
Isolation resistance
Input to Output
Input(Output) to Case
See table
1600VDC, min.
1600VDC, min.
Connect case to –Vin
with decoupling Y Cap
10⁹ohms, min.
Isolation capacitance
1500pF, max.
Switching frequency
300KHz, typ.
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
INPUT SPECIFICATIONS
Input voltage range
24V nominal input
48V nominal input
18 – 36VDC
36 – 75VDC
Input filter
Pi type
Input surge voltage
100mS max
24V input
48V input
50VDC
100VDC
Input reflected ripple
current
Nominal Vin and full load
20mAp-p
Start up time
Nominal Vin and
Power up
20mS, max.
constant resistive load Remote ON/OFF 20mS, max.
Start-up voltage
24V input
48V input
17V, typ.
34V, typ.
Shutdown voltage
24V input
48V input
15V, typ.
32V, typ.
Remote ON/OFF (Note 7)
Positive logic (standard)
Negative logic (option)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 12V
Input current of Remote control pin Nominal Vin
-0.5mA~1.0mA
Remote off state input current
Nominal Vin
4mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature (Note8)
-40ºC ~ +40ºC (without derating)
+40ºC ~ +110ºC (with derating)
Maximum case temperature
+110ºC
Storage temperature range
-55ºC ~ +125ºC
Over temperature protection
120ºC, typ.
Thermal impedance (Note 9)
Without Heat-sink
With Heat-sink
10.5ºC/Watt
8.4ºC/Watt
Thermal shock
MIL-STD-810F
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 2.00 X 0.40 Inch
(50.8 X 50.8 X 10.2 mm)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
60g (2.11oz)
1.093 x 10⁶ hrs
1.096 x 10⁵ hrs
Vibration
Relative humidity
EMC CHARACTERISTICS
EMI (Note 10)
EN55022
ESD
EN61000-4-2
Air
Contact
MIL-STD-810F
5% to 95% RH
± 8KV
± 6KV
Class A
Perf. Criteria A
Radiated immunity EN61000-4-3
10 V/m Perf. Criteria A
Fast transient (Note 11) EN61000-4-4
± 2KV Perf. Criteria A
Surge (Note 11)
EN61000-4-5
± 1KV Perf. Criteria A
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3 Issued Date：2008/06/12