English
Language : 

FEC40_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 40 WATTS DC-DC CONVERTER
FEC40 SERIES
40 WATTS DC-DC CONVERTER
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FEATURES
• 40 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 8A
• STANDARD 2.00 X 2.00 X 0.40 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• OFFER SINGLE, DUAL, DUAL POSITIVE
(TOTAL OUTPUT CURRENT 8A) AND TRIPLE OUTPUT
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
DESCRIPTION
The FEC40 series offer 40 watts of output power from a 2.00 x 2.00 x
0.40 inch package. The FEC40 series with 2:1 wide input voltage of
9~18VDC,18~36VDC and 36~75VDC and features 1600VDC of isolation,
short-circuit and over-voltage protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
40 Watts, max.
Single / Dual
± 1%
Voltage accuracy
Triple Main
± 1%
Auxiliary
± 5%
Minimum load (Note 6)
See Table
Voltage adjustability (Note 7)
Single and Dual output only
(not including Dual Positive and triple)
± 10%
Single/Dual
± 0.5%
Line regulation LL to HL at Full Load Triple main
± 1%
Auxiliary
± 5%
Single
± 0.5%
Load regulation
(Note 8)
Min. Load to Full Load
Dual
Triple
Main
± 1%
± 2%
Auxiliary
± 5%
Load cross regulation
Triple(main)
± 1%
(Note 9)
Dual/Triple(auxiliary)
± 5%
Ripple and noise
(Note 10)
20MHz bandwidth
(Measured with a 0.1µF/50V MLCC)
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time 25% load step change
1.5VDC output
1.8VDC output
Over voltage protection
Zener diode clamp
2.5VDC output
3.3VDC output
5VDC output
12VDC output
15VDC output
Over load protection % of FL at nominal input
250µs
3.9VDC
3.9VDC
3.9VDC
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
Input(Output) to Case
500VDC
See table
1600VDC, min. 1minute
1600VDC, min. 1minute
109ohms, min.
Isolation capacitance
1000pF, max.
Switching frequency (Note 11)
300kHz±10%
Safety approvals
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Dimensions
Weight
MTBF (Note 1)
MIL-HDBK-217F
Epoxy (UL94 V-0)
2.00 X 2.00 X 0.40 Inch
(50.8 X 50.8 X 10.2 mm)
60g (2.11oz)
9.224 x 105 hrs
INPUT SPECIFICATIONS
Input voltage range
12VDC nominal input
24VDC nominal input
48VDC nominal input
9 ~ 18VDC
18 ~ 36VDC
36 ~ 75VDC
Input filter
L-C type
Input surge voltage
12VDC input
24VDC input
48VDC input
36VDC 100mS, max.
50VDC 100mS, max.
100VDC 100mS, max.
Input reflected ripple current
40mAp-p
Start up time
Nominal input and
constant resistive load
Power up
Remote ON/OFF
25ms
25ms
12VDC input
Start-up voltage
24VDC input
48VDC input
12VDC input
Shutdown voltage
24VDC input
48VDC input
Remote ON/OFF (Note 12)
(Positive logic)
DC-DC ON
DC-DC OFF
9VDC
17.8VDC
36VDC
8VDC
16VDC
34VDC
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Input current of remote control pin Nominal input
-0.5mA~+0.5mA
Remote off state input current
Nominal input
2.5mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
+100ºC
Storage temperature range
-55ºC ~ +125ºC
Over temperature protection
Thermal impedance
(Note 13)
Thermal shock
Natural convection
Heat-sink with 20LFM
Heat-sink with 500LFM
115ºC
9.2ºC/Watt
7.6ºC/Watt
2.8ºC/Watt
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
EMC CHARACTERISTICS
EM I (Note 14)
EN55022
ESD
EN61000-4-2
Radiated immunity EN61000-4-3
5% to 95% RH
Class A, Class B
Air
Contact
± 8kV
± 6kV
Perf. Criteria B
10 V/m Perf. Criteria A
Fast transient (Note 15) EN61000-4-4
± 2kV Perf. Criteria B
Surge (Note 15)
EN61000-4-5
± 1kV Perf. Criteria B
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3
www.pduke.com
2013/09/13