FEC40W_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 40 WATTS DC-DC CONVERTER

FEC40W SERIES
40 WATTS DC-DC CONVERTER
FEATURES
• 40 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 10A
• STANDARD 2.00 X 2.00 X 0.40 INCH PACKAGE
• HIGH EFFICIENCY UP TO 89%
• 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
OPTIONS
Negative logic Remote On/Off
DESCRIPTION
The FEC40W series offer 40 watts of output power from a 2.00 x 2.00 x 0.40
inch package. The FEC40W series with 4:1 ultra wide input voltage of
9~36VDC and 18~75VDC and features 2000VDC of isolation, short-circuit
and over-voltage protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
INPUT SPECIFICATIONS
40 Watts, max. ^{Input voltage range}
24VDC nominal input
48VDC nominal input
9 ~ 36VDC
18 ~ 75VDC
Voltage accuracy
± 1% Input filter
Pi type
Minimum load (Note 6)
Voltage adjustability (Note 7) Single and Dual output
Line regulation
LL to HL at Full Load Single/Dual
Load regulation
(Note 8)
Min. Load to Full Load
Single
Dual
Load cross regulation (Note 9)
Dual
Ripple and noise
20MHz bandwidth
See Table _{Input surge voltage}
± 10%
24VDC input
48VDC input
50VDC 100ms, max.
100VDC 100ms, max.
Input reflected ripple current
20mAp-p
± 0.2%
± 0.5% ^{Start up time}
Nominal Vin and
Power up
20ms, max.
constant resistive load Remote ON/OFF 20ms, max.
± 1% _{Start-up voltage}
± 5%
See table ^{Shutdown voltage}
24VDC input
48VDC input
24VDC input
48VDC input
9VDC
18VDC
8VDC
16VDC
Temperature coefficient
Transient response recovery time
±0.02% / ºC, max. ^{Remote ON/OFF (Note 10)}
Positive logic (standard)
25% load step change
250µs
DC-DC ON
DC-DC OFF
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
3.3VDC output
3.9VDC Negative logic (option)
DC-DC ON
Short or 0V < Vr < 1.2V
5VDC output
6.2VDC
DC-DC OFF
Open or 3V < Vr < 12V
Over voltage protection 12VDC output
15VDC _{Input current of remote control pin Nominal input}
-0.5mA ~ +0.5mA
Zener diode clamp
Over load protection
Short circuit protection
15VDC output
±12VDC output
18VDC
±15VDC ^{Remote off state input current}
24VDC input
48VDC input
10mA
5mA
±15VDC output
±18VDC _{ENVIRONMENTAL SPECIFICATIONS}
% of FL at nominal input
150%, max.
Continuous, automatics recovery ^{Operating ambient temperature}
-40ºC ~ +50ºC (without derating)
+50ºC ~ +105ºC (with derating)
GENERAL SPECIFICATIONS
Maximum case temperature
+105ºC
Efficiency
See table ^{Storage temperature range}
-55ºC ~ +125ºC
Isolation voltage
Case grounding
Isolation resistance
Isolation capacitance
Switching frequency
Safety approvals
Case material
Base material
Input to Output
1600VDC, min. 1minute Over temperature protection
+110ºC
Input(Output) to Case 1600VDC, min. 1minute _{Thermal impedance}
Without Heat-sink
9.2ºC/Watt
Connect case to –INPUT _{(Note 11)}
With Heat-sink
7.6ºC/Watt
500VDC
with decoupling Y Cap
10⁹ohms, min.
Thermal shock
Vibration
MIL-STD-810F
MIL-STD-810F
2500pF, max.
Relative humidity
5% to 95% RH
300kHz±10%
EMC CHARACTERISTICS
IEC60950-1, UL60950-1, & EN60950-1
EMI (Note 12)
EN55022
Class A, Class B
Nickel-coated copper
FR4 PCB ^ESD
EN61000-4-2
Air
Contact
± 8kV
± 6kV
Perf. Criteria A
Potting material
Epoxy (UL94 V-0) _{Radiated immunity}
EN61000-4-3
10 V/m Perf. Criteria A
Dimensions
Weight
MTBF (Note 1)
MIL-HDBK-217F
2.00 X 2.00 X 0.40 Inch _{Fast transient (Note 13) EN61000-4-4}
(50.8 X 50.8 X 10.2 mm)
60g (2.11oz) ^{Surge (Note 13)}
EN61000-4-5
6.617 x 10⁵ hrs ^{Conducted immunity EN61000-4-6}
± 2kV Perf. Criteria B
± 1kV Perf. Criteria A
10 Vr.m.s Perf. Criteria A
Page 1 of 3
www.pduke.com
2014/4/21