FEC30-24S1P5W Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 30 WATTS MAXIMUM OUTPUT POWER

FEATURES
• 30 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 8A
• STANDARD 2.0 X 1.6 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 88%
• 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• OFFER SINGLE AND DUAL OUTPUT
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
OPTIONS
Negative logic Remote On/Off
DESCRIPTION
The FEC30W series offer 30 watts of output power from a 2 x 1.6 x 0.4
inch package .The FEC30W series with 4:1 wide input voltage of
10-40VDC and 18-75VDC and features 1600VDC of isolation,
short-circuit and over-voltage protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
30 Watts, max.
Voltage accuracy
Full load and nominal Vin
± 1%
Minimum load
See Table
Voltage adjustability
± 10%
Line regulation
LL to HL at Full Load
± 0.5%
Load regulation
No Load to Full Load
Single
Dual
± 0.5%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
(Measured with a 0.1μF/50V MLCC)
See table
Temperature coefficient
± 0.02% / ºC, max.
Transient response recovery time 25% load step change
Over voltage protection
Zener diode clamp
1.5V output
1.8V output
2.5V output
3.3V output
5V output
12V output
15V output
Over load protection
% of FL at nominal input
250μS
3.9VDC
3.9VDC
3.9VDC
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
Input (Output) to Case
See table
1600VDC, min.
1600VDC, min.
10⁹ohms, min.
Isolation capacitance
1000pF, max.
Switching frequency
300KHz, typ.
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 1.60 X 0.40 Inch
(50.8 X 40.6 X 10.2 mm)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
48g (1.69oz)
1.315 x 10⁶ hrs
3.456 x 10⁵ hrs
INPUT SPECIFICATIONS
Input voltage range
24V nominal input
48V nominal input
10 – 40VDC
18 – 75VDC
Input filter
L-C type
Input surge voltage
100mS max
24V input
48V input
50VDC
100VDC
Input reflected ripple current Nominal Vin and full load
20mAp-p
Start up time
Nominal Vin and
Power up
constant resistive load Remote ON/OFF
10mS, typ.
10mS, typ.
Start-up voltage
24V input
48V input
10VDC
18VDC
Shutdown voltage
24V input
48V input
8VDC
16VDC
Remote ON/OFF (Note 6)
(Positive logic)(Standard)
DC-DC ON
Open or 3V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)(Option)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3V < Vr < 12V
Input current of remote control pin Nominal Vin
-0.5mA ~ +0.5mA
Remote off state input current Nominal Vin
3mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
100ºC
Over temperature protection
115ºC, typ.
Storage temperature range
-55ºC ~ +105ºC
Thermal impedance (Note 7)
Nature convection
Nature convection with heat-sink
10ºC/Watt
8.24ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 8)
ESD
EN55022
EN61000-4-2
Class A
Air
Contact
± 8KV
± 6KV
Perf. Criteria B
Radiated immunity EN61000-4-3
10 V/m Perf. Criteria A
Fast transient (Note 9) EN61000-4-4
± 2KV Perf. Criteria A
Surge (Note 9)
EN61000-4-5
± 1KV Perf. Criteria B
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3 Issued Date：2008/05/21