FEC30-12S1P5 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 30 WATTS MAXIMUM OUTPUT POWER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FEATURES
• 30 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 6A
• STANDARD 2.0 X 1.6 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• OFFER SINGLE AND DUAL OUTPUT
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
DESCRIPTION
The FEC30 series offer 30 Watts of output power from a 2 x 1.6 x 0.4 inch
package. The FEC30 series with 2:1 wide input voltage of 9-18VDC,
18-36VDC and 36-75VDC and features 1600VDC of isolation,
short-circuit and over-voltage protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
30 Watts, max.
Voltage accuracy
Full load and nominal Vin Single/Dual
± 1%
Minimum load
0%
Voltage adjustability
± 10%
Line regulation
Load regulation
LL to HL at Full Load
No Load to Full Load
Single
Dual
Single
Dual
± 0.2%
± 0.5%
± 0.5%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
(Measured with a 0.1μF/50V MLCC)
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time 25% load step change
1.5V output
1.8V output
Over voltage protection
Zener diode clamp
2.5V output
3.3V output
5V output
12V output
15V output
Over load protection % of FL at nominal input
300μS
3.9VDC
3.9VDC
3.9VDC
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
Input (Output) to Case
See table
1600VDC, min.
10⁹ohms, min.
Isolation capacitance
1000pF, max.
Switching frequency
300KHz, typ.
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 1.60 X 0.40 Inch
(50.8 X 40.6 X 10.2 mm)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
48g (1.69oz)
1.316 x 10⁶ hrs
3.465 x 10⁵ hrs
INPUT SPECIFICATIONS
Input voltage range
12V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
Input filter
L-C type
Input surge voltage
100mS max
12V input
24V input
48V input
36VDC
50VDC
100VDC
Input reflected ripple current
Nominal Vin and full
load
30mAp-p
Start up time
Nominal Vin and
constant resistive load
Power up
Remote ON/OFF
25mS, typ.
25mS, typ.
12V input
9VDC
Start-up voltage
24V input
17.8VDC
48V input
36VDC
12V input
8VDC
Shutdown voltage
24V input
16VDC
48V input
33VDC
Remote ON/OFF (Note 6)
(Positive logic)
DC-DC ON
Open or 3.0V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
Input current of remote control pin Nominal Vin
-0.5mA ~ 0.5mA
Remote off state input current
Nominal Vin
2.5mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
100ºC
Storage temperature range
-55ºC ~ +105ºC
Over temperature protection
Nature convection
Thermal impedance (Note 7) Nature convection with
heat-sink
Thermal shock
115ºC, typ
10ºC/Watt
8.24ºC/Watt
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 8)
ESD
EN55022
EN61000-4-2
Class A
Air
Contact
± 8KV
± 6KV
Perf. Criteria B
Radiated immunity EN61000-4-3
10 V/m Perf. Criteria A
Fast transient (Note 9) EN61000-4-4
± 2KV Perf. Criteria B
Surge (Note 9)
EN61000-4-5
± 1KV Perf. Criteria B
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3 Issued Date：2008/05/21