FEC15-12S33 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 15 WATTS OUTPUT POWER

FEATURES
• 15 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 4A
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 88%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• CE MARK MEETS 2006/95/EC,93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
APPLICATIONS
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
OPTIONS
Positive logic & Negative logic Remote On/Off
DESCRIPTION
The FEC15 series offer 15 watts of output power from a 2 x 1 x 0.4 inch
package. The FEC15 series with 2:1 wide input voltage of 9-18, 18-36
and 36-75VDC.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
15 Watts, max.
Voltage accuracy
Full load and nominal Vin
± 1%
Minimum load (Note 6)
See Table
Line regulation
LL to HL at Full Load
± 0.5%
Load regulation
Min. load to Full load ^Single
Dual
± 0.5%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
Temperature coefficient
Single
Dual
50mVp-p
75mVp-p
±0.02% / ºC, max.
Transient response recovery time 25% load step change
3.3V output
Over voltage protection 5V output
(Zener diode clamp) 12V output
15V output
250μS
3.9VDC
6.2VDC
15VDC
18VDC
Over load protection % of FL at nominal input
150%, max.
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Isolation resistance
1600VDC, min.
10⁹ohms, min.
Isolation capacitance
300pF, max.
Switching frequency
Single output
Dual output
500KHz, typ.
300KHz, typ.
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
27g (0.95oz)
2.041 x 10⁶ hrs
1.044 x 10⁶ hrs
INPUT SPECIFICATIONS
Input voltage range
12V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
Input filter
Pi type
Input surge voltage
100mS max
12V input
24V input
48V input
36VDC
50VDC
100VDC
Input reflected ripple current Nominal Vin and full load
20mAp-p
Start up time
Nominal Vin and
constant resistive load
Power up
20mS, typ.
Remote ON/OFF (Option) (Note 7)
(Positive logic)
DC-DC ON
DC-DC OFF
(Negative logic)
DC-DC ON
DC-DC OFF
Input current of remote control pin Nominal Vin
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3.5V < Vr < 12V
-0.5mA ~ +1mA
Remote off state input current
Nominal Vin
20mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
100ºC
Storage temperature range
Thermal impedance (Note 8)
Thermal shock
-55ºC ~ +105ºC
Nature convection
12ºC/Watt
Nature convection with heat-sink 10ºC/Watt
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 9)
EN55022
ESD
EN61000-4-2
Radiated immunity EN61000-4-3
Fast transient (Note 10) EN61000-4-4
Surge (Note 10)
EN61000-4-5
Air
Contact
Class A
± 8KV
± 6KV ^{Perf. Criteria B}
10 V/m Perf. Criteria A
± 2KV Perf. Criteria B
± 1KV Perf. Criteria B
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3 Issued Date：2008/05/21