FDC20W_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 20 WATTS DC-DC CONVERTER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FDC20(W) SERIES
20 WATTS DC-DC CONVERTER
FEATURES
• 20 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 4A
• STANDARD 2.00 X 1.60 X 0.40 INCH PACKAGE
• HIGH EFFICIENCY UP TO 87%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
DESCRIPTION
The FDC20 and FDC20W series offer 20 Watts of output power from a
2.00 x 1.60 x 0.40 inch package. The FDC20 series with 2:1 wide input voltage
of 9~18VDC, 18~36VDC and 36~75VDC. The FDC20W series with 4:1 wide
input voltage of 9~36VDC and 18~75VDC.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
20 Watts, max.
Voltage accuracy
Minimum load (Note 6)
Single & Dual
Triple 3.3V/5V
Auxiliary
± 1%
± 1%
± 5%
See Table
Voltage adjustability
Single (W)
Line regulation
LL to HL at Full Load
Dual (W)
Triple 3.3V/5V
Auxiliary
Single
Load regulation
Min. Load to Full Load
Dual
Triple 3.3V/5V
Auxiliary
Dual
Cross regulation (Note 7)
Triple 3.3V/5V
Auxiliary
Ripple and noise 20MHz bandwidth
± 10%
± 0.2%
± 0.5%
± 1%
± 5%
± 0.5%
± 3%
± 2%
± 5%
± 5%
± 2%
± 5%
See table
Temperature coefficient
Transient response
recovery time
25% load step change
3.3VDC output
Over voltage protection 5VDC output
Zener diode clamp
12VDCoutput
15VDC output
Over load protection % of FL at nominal input
±0.02% / ºC, max.
Single
Dual
Triple
250µs
250µs
500µs
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Isolation resistance
Input to Output
1600VDC, min. 1minute
Input(Output) to Case 1600VDC, min. 1minute
500VDC
10⁹ohms, min.
FDC20
Input voltage range
FDC20W
12VDC nominal input
24VDC nominal input
48VDC nominal input
24VDC nominal input
48VDC nominal input
9 ~ 18VDC
18 ~ 36VDC
36 ~ 75VDC
9 ~ 36VDC
18 ~ 75VDC
Input filter
Pi type
Input surge voltage
12VDC input
24VDC input
48VDC input
36VDC 100ms, max.
50VDC 100ms, max.
100VDC 100ms, max.
Input reflected ripple current
25mAp-p
Start up time
Nominal input and
constant resistive load
Power up
20ms
Remote ON/OFF (Note 8)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
Input current of remote control pin Nominal input
-0.5~1.0mA
Remote off state input current
Nominal input
20mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
+100ºC
Storage temperature range
-55ºC ~ +125ºC
Thermal
impedance
(Note
9)NNaattuurraall
convection
convection
with
heat-sink
10ºC/watt
8.24ºC/watt
Thermal shock
MIL-STD-810F
Vibration
Relative humidity
MIL-STD-810F
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 10)
ESD
EN55022
EN61000-4-2
Air
Contact
Class A, Class B
± 8kV
± 6kV
Perf. Criteria B
Isolation capacitance
300pF, max. Radiated immunity EN61000-4-3
10 V/m Perf. Criteria A
Switching frequency
300kHz±10% Fast transient (Note 11) EN61000-4-4
± 2kV Perf. Criteria B
Safety approvals
IEC60950-1, UL60950-1, & EN60950-1 Surge (Note 11)
EN61000-4-5
± 1kV Perf. Criteria B
Case material
Nickel-coated copper Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Base material
Non-conductive black plastic
Potting material
Epoxy (UL94 V-0)
Dimensions
Weight
2.00 X 1.60 X 0.40 Inch
(50.8 X 40.6 X 10.2 mm)
48g (1.69oz)
MTBF (Note 1)
MIL-HDBK-217F
1.922 x 10⁶ hrs
Page 1 of 3
www.pduke.com
2014/4/30