FDC15_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 15 WATTS DC-DC CONVERTER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FDC15 SERIES
15 WATTS DC-DC CONVERTER
FEATURES
• 15 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 3A
• STANDARD 2.00 X 1.60 X 0.40 INCH PACKAGE
• HIGH EFFICIENCY UP TO 82%
• 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
DESCRIPTION
The FDC15 series offer 15 watts of output power from a 2.00 x 1.60 x
0.40 inch package. The FDC15 series have 4:1 wide input voltage of
9~36VDC and 18~75VDC. The FDC15 features 1600VDC of isolation,
short-circuit and over-voltage protection.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
Voltage accuracy
Minimum load (Note 6)
15 Watts, max.
± 1%
See Table
Voltage adjustability
± 10%
Line regulation
LL to HL at Full Load
Load regulation
Min. load to Full load
Single
Dual
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 0.2%
± 0.5%
± 1%
± 5%
Ripple and noise
20MHz bandwidth
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time 25% load step change
Over voltage protection
Zener diode clamp
5VDC output
12VDC output
15VDC output
Over load protection % of FL at nominal input
250µs
6.2VDC
15VDC
18VDC
150%, max.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Isolation capacitance
Input to Output
Input(Output) to Case
500VDC
See table
1600VDC, min. 1minute
1600VDC, min. 1minute
10⁹ohms, min.
300pF, max.
Switching frequency
Safety approvals
270kHz±10%
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
Potting material
Dimensions
Weight
MTBF (Note 1)
Non-conductive black plastic
MIL-HDBK-217F
Epoxy (UL94 V-0)
2.00 X 1.60 X 0.40 Inch
(50.8 X 40.6 X 10.2 mm)
48g (1.69oz)
2.250 x 10⁶ hrs
INPUT SPECIFICATIONS
Input voltage range
24VDC nominal input
48VDC nominal input
9 ~ 36VDC
18 ~ 75VDC
Input filter
Pi type
Input surge voltage
24VDC input
48VDC input
50VDC 100ms, max.
100VDC 100ms, max.
Input reflected ripple current
20mAp-p
Start up time
Nominal input and
constant resistive load
Remote ON/OFF (Note 7)
(Positive logic)
DC-DC ON
DC-DC OFF
Power up
20ms
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Input current of remote control pin Nominal input
-0.5mA~+0.5mA
Remote off state input current Nominal input
20mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
100ºC
Storage temperature range
-55ºC ~ +125ºC
Thermal impedance
(Note 8)
Natural convection
Natural convection with heat-sink
10ºC/Watt
8.24ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI
ESD
Radiated immunity
EN55022
EN61000-4-2
EN61000-4-3
Class A, Class B
Air
Contact
± 8kV
± 6kV
Perf. Criteria B
10 V/m Perf. Criteria A
Fast transient (Note 9) EN61000-4-4
± 2kV Perf. Criteria B
Surge (Note 9)
EN61000-4-5
± 1kV Perf. Criteria B
Conducted immunity EN61000-4-6
10 Vr.m.s Perf. Criteria A
Page 1 of 3
www.pduke.com
2014/4/30