FDC10W_14 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 10 WATTS DC-DC CONVERTER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FDC10(W) SERIES
10 WATTS DC-DC CONVERTER
FEATURES
• 10 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 2.5A
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 87%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY (300kHz)
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
NEGATIVE & POSITIVE LOGIC REMOTE ON/OFF
DESCRIPTION
The FDC10 and FDC10-W series offer 10 watts of output power from a
2.0 x 1.0 x 0.4 inch package. FDC10 series have 2:1 wide input voltage of
9 ~ 18, 18 ~ 36 and 36 ~ 75VDC. FDC10-W series have 4:1 ultra wide
input voltage of 9 ~ 36 and 18 ~ 75VDC.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted.
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
10 Watts, max.
Voltage accuracy
Single / Dual
± 1%
Minimum load
0%
Line regulation
LL to HL at Full Load Single / Dual
± 0.2%
Load regulation
No Load to Full Load
Single
Dual
± 0.5%
± 1%
Cross regulation(Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
Single
Dual
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response recovery time 25% load step change
3.3VDC output
Over voltage protection 5VDC output
Zener diode clamp
12VDC output
15VDC output
Over load protection % of FL at nominal input
250µs
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
Input(Output) to Case
500VDC
See table
1600VDC, min. 1minute
1600VDC, min. 1minute
10⁹ohms, min.
Isolation capacitance
300pF, max.
Switching frequency
300kHz±10%
FDC10 12VDC nominal input
9 ~ 18VDC
24VDC nominal input
18 ~ 36VDC
Input voltage range
48VDC nominal input
36 ~ 75VDC
FDC10-W 24VDC nominal input
9 ~ 36VDC
48VDC nominal input
18 ~ 75VDC
Input filter
Pi type
12VDC input
36VDC 100ms, max.
Input surge voltage
24VDC input
50VDC 100ms, max.
48VDC input
100VDC 100ms, max.
Input reflected ripple current
30mAp-p
Start up time
Nominal input and
Constant resistive load
Power up
20ms
Remote ON/OFF (Option) (Note 6)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3.5V < Vr < 12V
Input current of remote control pin Nominal input
-0.5mA ~ +1mA
Remote off state input current
Nominal input
20mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
temperature
(Reference derating curve)
Maximum case temperature
Standard
-25ºC ~ +85ºC (with derating)
M1 (Note 7) -40ºC ~ +85ºC (non-derating)
M2 (W series) -40ºC ~ +85ºC (with derating)
+105ºC
Storage temperature range
Thermal impedance (Note 8)
Thermal shock
-55ºC ~ +125ºC
Nature convection
12ºC/watt
Nature convection with heat-sink 10ºC/watt
MIL-STD-810F
Safety approvals
IEC60950-1, UL60950-1, & EN60950-1 Vibration
MIL-STD-810F
Case material
Nickel-coated copper ^{Relative humidity}
5% to 95% RH
Base material
Non-conductive black plastic EMC CHARACTERISTICS
Potting material
Dimensions
Weight
MTBF (Note 1)
MIL-HDBK-217F
Epoxy (UL94 V-0)
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
27g (0.95oz)
3.342 x 10⁶ hrs
EMI (Note 9)
EN55022
ESD
EN61000-4-2
Radiated immunity
EN61000-4-3
Fast transient (Note 10) EN61000-4-4
Surge (Note 10)
EN61000-4-5
Conducted immunity EN61000-4-6
Air ± 8kV
Contact ± 6kV
10 V/m
± 2kV
± 1kV
10 Vr.m.s
Class B
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Page 1 of 3
www.pduke.com
2014/4/30