FDC10-12S33 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 10 WATTS OUTPUT POWER

FEATURES
• 10 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 2.5A
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 87%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY (300KHz)
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
Telecom/Datacom
OPTIONS
Negative & Positive logic Remote On/Off
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FDC10 and FDC10-W series offer 10 watts of output power from a
2.0 x 1.0 x 0.4 inch package. FDC10 series have 2:1 wide input voltage of
9-18, 18-36 and 36-75VDC. FDC10-W series have 4:1 ultra wide input
voltage of 9-36 and 18-75VDC.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted.
OUTPUT SPECIFICATIONS
Output power
10 Watts, max.
Voltage accuracy
Full load and nominal Vin
± 1%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No Load to Full Load
Single
Dual
± 0.5%
± 1%
Cross regulation(Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
Temperature coefficient
Single
Dual
See table
±0.02% / ºC, max.
Transient response recovery time 25% load step change
250μS
3.3V output
Over voltage protection 5V output
Zener diode clamp
12V output
15V output
3.9VDC
6.2VDC
15VDC
18VDC
Over load protection % of FL at nominal input
150%, max.
Short circuit protection
Hiccup, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Isolation capacitance
Switching frequency
Approvals and standard
Case material
Base material
Potting material
Dimensions
Weight
MTBF (Note 1)
See table
1600VDC, min.
10⁹ohms, min.
300pF, max.
300KHz, typ.
IEC60950-1, UL60950-1, EN60950-1
Nickel-coated copper
Non-conductive black plastic
Epoxy (UL94-V0)
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
27g (0.95oz)
BELLCORE TR-NWT-000332 1.976 x 10⁶ hrs
MIL-HDBK-217F
1.416 x 10⁶ hrs
INPUT SPECIFICATIONS
FDC10 12V nominal input
9 – 18VDC
24V nominal input
18 – 36VDC
Input voltage range
48V nominal input
36 – 75VDC
FDC10-W 24V nominal input
9 – 36VDC
48V nominal input
18 – 75VDC
Input filter
Pi type
Input surge voltage
100mS max
12V input
24V input
48V input
36VDC
50VDC
100VDC
Input reflected ripple current Nominal Vin and full load
30mAp-p
Start up time
Nominal Vin and
constant resistive load
Power up
20mS, typ.
Remote ON/OFF (Option) (Note 6)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3.5V < Vr < 12V
Input current of remote control pin Nominal Vin
-0.5mA ~ +1mA
Remote off state input current
Nominal Vin
20mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
temperature
(Reference derating curve)
Maximum case temperature
Standard
-25ºC ~ +85ºC (with derating)
M1 (Note 7) -40ºC ~ +85ºC (non-derating)
M2 (W series) -40ºC ~ +85ºC (with derating)
+100ºC
Storage temperature range
Thermal impedance (Note 8)
Thermal shock
-55ºC ~ +105ºC
Nature convection
12ºC/watt
Nature convection with heat-sink 10ºC/watt
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 9)
EN55022
ESD
EN61000-4-2
Air
Contact
± 8KV
± 6KV
Radiated immunity
EN61000-4-3
Fast transient (Note 10) EN61000-4-4
Surge (Note 10)
EN61000-4-5
10 V/m
± 2KV
± 1KV
Conducted immunity EN61000-4-6
10 Vr.m.s
Class A
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Page 1 of 3 Issued Date：2008/05/21