FDC05-12S33 Datasheet, PDF (1/2 Pages) Power Mate Technology Co., LTD – 5 WATTS OUTPUT POWER

FEATURES
• 5 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 1000mA
• STANDARD 2.0 X 1.0 X 0.4 INCH PACKAGE
• HIGH EFFICIENCY UP TO 83%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
Wireless Network
OPTIONS
Negative & Positive logic Remote On/Off
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FDC05 and FDC05-W series offer 5 watts of output power from a 2 x
1 x 0.4 inch package without derating to 71ºC ambient temperature.
FDC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC.
FDC05-W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
5 Watts, max.
Voltage accuracy
Full load and nominal Vin
± 1%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Load regulation
No load to Full load
Single
Dual
± 0.2%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Ripple and noise
20MHz bandwidth
See table
Temperature coefficient
±0.02% / ºC, max.
Transient response 25% load step change
Single 200μS
recovery time
FL to 1/2 FL ±1% error band
Dual 200μS
Over load protection % of FL at nominal input
170%, typ.
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation Voltage Input to Output to Case
Isolation resistance
1600VDC, min.
10⁹ohms, min.
Isolation capacitance
Switching frequency
Approvals and standard
300pF, max.
Standard
“W” series
300KHz, typ.
200KHz, typ.
IEC60950-1, UL60950-1, EN60950-1
Case material
Nickel-coated copper
Base material
Non-conducted black plastic
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
2.00 X 1.00 X 0.40 Inch
(50.8 X 25.4 X 10.2 mm)
27g (0.95oz)
BELLCORE TR-NWT-000332 3.145 x 10⁶ hrs
MIL-HDBK-217F
2.326 x 10⁶ hrs
INPUT SPECIFICATIONS
Input voltage range
Input filter
FDC05 12V nominal input
24V nominal input
48V nominal input
FDC05-W 24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
9 – 36VDC
18 – 75VDC
Pi type
12V input
36VDC
Input surge voltage 100mS max
24V input
50VDC
48V input
100VDC
Input reflected ripple current Nominal Vin and full load
20mAp-p
Start up time
Nominal Vin and
Constant resistive load
Power up
450mS, max.
Remote ON/OFF (Option) (Note 6)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF Open or 3.5V < Vr < 12V
Input current of remote control pin Nominal Vin
-0.5mA ~ +1mA
Remote off state input current
Nominal Vin
2.5mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient
Standard
temperature
M1 (Note 7)
(Reference derating curve) M2 (W series)
Maximum case temperature
Storage temperature range
-25ºC ~ +85ºC (with derating)
-40ºC ~ +85ºC (non-derating)
-40ºC ~ +85ºC (with derating)
+100ºC
-55ºC ~ +105ºC
Thermal
impedance
(Note
8)
Nature
Nature
convection
convection
with
heat-sink
12ºC/watt
10ºC/watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI
EN55022
ESD
EN61000-4-2
Radiated immunity
EN61000-4-3
Fast transient (Note 9) EN61000-4-4
Surge (Note 9)
EN61000-4-5
Conducted immunity EN61000-4-6
Class A
Air
Contact
± 8KV
± 6KV ^{Perf. Criteria B}
10 V/m Perf. Criteria A
± 2KV Perf. Criteria B
± 1KV Perf. Criteria B
10 Vr.m.s Perf. Criteria A
Page 1 of 2 Issued Date：2008/05/21