DR1P5-05S05 Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – 1.5 WATTS REGULATED OUTPUT POWER

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
FEATURES
• 1.5 WATTS REGULATED OUTPUT POWER
• OUTPUT CURRENT UP TO 300mA
• STANDARD 1.25 X 0.80 X 0.40 INCH
• HIGH EFFICIENCY UP TO 55%
• INPUT RANGE FROM 4.5VDC TO 5.5VDC, 10.8VDC TO 13.2VDC,
AND 21.6VDC TO 26.4VDC
• FIVE-SIDED EMI SHIELD
• LOW OUTPUT RIPPLE & NOISE
• PI TYPE INPUT FILTER
• 500VDC ISOLATION VOLTAGE
• STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
SMD TYPE
DESCRIPTION
The DR1P5 series offer 1.5 watts of output power from a package in an IC
compatible 24 pin DIP configuration without derating to 71ºC ambient
temperature and pin to pin compatible to MKC03 series. DR1P5 series
have input voltage of 4.5-5.5, 10.8-13.2 and 21.6-26.4VDC.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output power
Voltage accuracy
Full load and nominal Vin
INPUT SPECIFICATIONS
1.5 Watts, max. ^{Input voltage range}
± 4%
5V nominal input
12V nominal input
24V nominal input
Minimum load
0% Input filter
Line regulation
Load regulation
Cross regulation
LL to HL at Full Load
25% to 100% FL
D05 output
others
Asymmetrical load 25% / 100% FL
± 0.3% _{ENVIRONMENTAL SPECIFICATIONS}
± 1.5%
± 0.5% ^{Operating ambient temperature}
± 5% _{Maximum case temperature}
Ripple and noise
20MHz bandwidth
Temperature coefficient
Short circuit protection (Note 6)
GENERAL SPECIFICATIONS
Efficiency
See table
±0.02% / ºC, max.
1 Sec.
Storage temperature range
Thermal impedance
Thermal shock
See table ^Vibration
Nature convection
Isolation voltage
Isolation resistance
Isolation capacitance
Switching frequency
500VDC, min. Relative humidity
10⁹ohms, min. _{EMC CHARACTERISTICS}
30pF, max. _EMI
EN55022
20KHz, min.
Design meet safety standard
IEC60950-1, UL60950-1,EN60950-1
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Potting material
Dimensions
Weight
MTBF (Note 1)
Epoxy (UL94-V0)
1.25 X 0.80 X 0.40 Inch
(31.8 X 20.3 X 10.2 mm)
DIP
16g (0.55oz)
SMD
BELLCORE TR-NWT-000332
MIL-HDBK-217F
18g (0.62oz)
5.531 x 10⁶ hrs
3.827 x 10⁶ hrs
4.5 – 5.5VDC
10.8 – 13.2VDC
21.6 – 26.4VDC
Pi type
-30ºC ~ +71ºC
+100ºC
-55ºC ~ +105ºC
20ºC/watt
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
Class A
Page 1 of 3 Issued Date：2009/03/06