DOS06-12T Datasheet, PDF (1/3 Pages) Power Mate Technology Co., LTD – Non-isolated Point of load DC/DC converters

APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Distributed Power Architectures
Semiconductor Equipment
Microprocessor Power Applications
FEATURES
• OUTPUT CURRENT UP TO 6A
• SMALL SIZE AND LOW PROFILE :
0.80” X 0.45” X 0.25” (SMD) ; 0.90” X 0.40” X 0.24” (SIP)
• HIGH EFFICIENCY - 89% @ 3.3V FULL LOAD
• INPUT RANGE FROM 8.3VDC TO 14.0VDC
• FIXED SWITCHING FREQUENCY (300KHZ)
• SMD & SIP PACKAGES
• OUTPUT VOLTAGE PROGRAMMABLE FROM 0.75VDC TO 5.0VDC
VIA EXTERNAL RESISTOR
• INPUT UNDER-VOLTAGE LOCKOUT
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
Positive Logic Remote on/off
DESCRIPTION
DOS06-12T (SMD type), DOH06-12T (for Vertical Mounting SIP type) and
DOH06-12TA (for Horizontal Mounting SIP type) are non-isolated DC/DC
converters that can deliver up to 6A of output current with full load efficiency of 89%
at 3.3V output.
T E C H N I C A L S P E C I F I C A T I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
Output current
6A max
Voltage accuracy
Full load and Vin(nom)
± 2%Vo(set)
Minimum load
0%
Line regulation
Vin=Vin(min) to Vin(max)
at Full Load
± 0.3%Vo(set),typ
Load regulation
No Load to Full Load
± 0.4%Vo(set),typ
Ripple and noise (Note2) 20MHz bandwidth
Temperature coefficient
20mVrms,max
50mVp-p,max
±0.4%, typ
Dynamic load ^{ΔIo /Δt = 2.5A/μS ,Vin(nom)}
response
Load change step
(Note 2)
(50% to 100% or
100% to 50% of Io(max))
Dynamic load ^{ΔIo /Δt = 2.5A/μS ,Vin(nom)}
response
Load change step
(Note 3)
(50% to 100% or
100% to 50% of Io(max))
Peak deviation
Setting time
(Vo<10%peak
deviation)
Peak deviation
Setting time
(Vo<10%peak
deviation)
200mV,typ
25μS,typ
50mV,typ
50μS,typ
Output current limit
200%,typ
Output short-circuit current
Hiccup, automatics recovery
External load capacitance
ESR≧1mΩ
ESR≧10mΩ
1000μF,max
3000μF,max
Output
voltage
overshoot-startup
Vin=Vin(min)
F.L.
to
Vin(max);
1%Vo(set)
Voltage adjustability (see fig.1) (Note 4)
0.7525V ~ 5.0V
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
None
Switching frequency
300KHz, typ
Approvals and standard
IEC60950-1, UL60950-1, EN60950-1
Dimensions
SMD
SIP
0.80 X 0.45 X 0.25 Inch
(20.3 X 11.4 X 6.5 mm)
0.90 X 0.40 X 0.24 Inch
(22.9 X 10.2 X 6.0 mm)
Weight
MTBF (Note 1)
BELLCORE TR-NWT-000332
MIL-HDBK-217F
2.8g(0.1oz)
1.990 x 10⁷ hrs
3.007 x 10⁶ hrs
INPUT SPECIFICATIONS
Input voltage range
Vo(set) ≦3.63V
Vo(set) >3.63V ^{Vin(nom) =12V}
Maximum input current Vin=Vin(min); Io=Io(max)
8.3 – 14VDC
8.3 – 13.2VDC
4.5A
Input filter (Note 5)
C filter
Input no load current
(Vin=12V, Io=0, module enabled)
Input under voltage lockout
Vo(set) =0.75Vdc
Vo(set) =5.0Vdc
Start-up voltage
Shutdown voltage
17mA,typ
100mA,typ
7.9V,typ
7.8V,typ
Input reflected ripple current 5~20MHz, 1μH source impedance 30mAp-p
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
–40ºC ~ +85ºC(with derating)
Storage temperature range
–55ºC ~ +125ºC
Thermal shock
MIL-STD-810F
Over temperature protection
140ºC,typ
FEATURE SPECIFICATIONS
Remote ON/OFF(Note 6)
Negative logic(standard) ON = 0V < Vr < 0.3V
OFF =2.5V < Vr < Vin(max)
Positive logic(option)
ON = (Vin-4) < Vr < Vin(max)
OFF=0V < Vr < 0.3V
Input current of Remote control pin
Remote off state input current Nominal Vin
I_IN=10μA,max
I_IN=1mA,max
I_IN=10μA,max
I_IN=1mA,max
10μA~1.0mA
1.2mA,typ
Rise time Time for Vo to rise from 10% to 90%of Vo(set )
6ms,max.
Turn-on delay time
Case 1 (Note 7)
Case 2 (Note 8)
3ms,typ
3ms,typ
Page 1 of 3 Issued Date：2007/10/12