English
Language : 

PD2435 Datasheet, PDF (3/11 Pages) OSRAM GmbH – 4-Character 5 x 7 Dot Matrix Alphanumeric Programmable Display™ with Built-in CMOS Control Functions
Maximum Ratings
DC Supply Voltage.........................................–0.5 V to +7.0 Vdc
Input Voltage Relative
to GND (all inputs)...............................–0.5 V to VCC +0.5 Vdc
Operating Temperature
PD243X/353X................................................. –40°C to +85°C
PD443X .......................................................... –40°C to +70°C
Storage Temperature....................................... –40°C to +100°C
Maximum Solder Temperature, .063" (1.59 mm)
below Seating Plane, t<5.0 s ........................................ 260°C
Optical Characteristics at 25°C
Spectral Peak Wavelength
HER ..................................................................... 635 nm typ.
Red ...................................................................... 660 nm typ.
Green ................................................................... 565 nm typ.
Viewing Angle
Horizontal
PD243X/353X ................................................................. ±55°
PD443X........................................................................... ±40°
Vertical (off normal axis).................................................. ±65°
Digit Height
PD243X........................................................ 0.200" (5.08 mm)
PD353X........................................................ 0.270" (6.86 mm)
PD443X........................................................ 0.45" (11.43 mm)
Time Averaged Luminous Intensity (1)
Red ...............................................................30 µcd/LED min.
HER/Green....................................................90 µcd/LED min.
LED to LED Intensity Matching...............................1.8:1.0 max.
Device to Device (one bin) ......................................1.5:1.0 max.
Bin to Bin (adjacent bins).........................................1.9:1.0 max.
Note:
1) Peak luminous intensity values can be calculated by
multiplying these values by 7.
Figure 1. Top View
20
11 20
Figure 2. Timing Characteristics—Data “Write” Cycle
CE0, CE1
TCES
TCEH
2.0 V
0.8 V *
A0, A1
D0–D6
RD
WR
2.0 V
0.8 V *
TAS
TAH
TDS
TDH
2.0 V
0.8 V *
2.0 V
0.8 V *
TRS
TRH
TW
TACC
2.0 V
0.8 V *
Notes:
1. All input voltages are VIL=0.8 V, VIH=2.0 V.
2. These waveforms are not edge triggered.
Figure 3. Timing Characteristics—Data “Read” Cycle
CE0, CE1
TCES
TCEH
2.0 V
0.8 V *
A0–A3
D0–D6
WR
RD
TAS
TWS
TAH
DATA OUT
TDD
TDH
TRI
TWH
TR
TRACC
2.0 V
0.8 V *
2.0 V
0.8 V *
2.0
0.8
V
V
*
2.0
0.8
V
V
*
11 20
11
DIGIT3 DIGIT2 DIGIT1 DIGIT0
DIGIT3 DIGIT2 DIGIT1 DIGIT0
DIGIT3 DIGIT2 DIGIT1 DIGIT0
1
10 1
10 1
10
 2001 OSRAM Opto Semiconductors Inc.• San Jose, CA
www.infineon.com/opto • 408-456-4000
OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany
www.osram-os.com • +49-941-202-7178
3
PD2535/6/7, PD3535/6/7, PD4435/6/7
July 5, 2001-14