CO-495 Datasheet, PDF (2/2 Pages) Oscilent Corporation – 495 Series SMD Crystal Oscillator

Oscilent Corporation | 495 Series SMD Crystal Oscillator
Page 2 of 2
PIN CONNECTIONS
#1
Tristate Enable High or No
Connection (TS1)
#2
Tristate Enable High or No
Connection (TS)
#3 Ground
#4 Output
#5 Complimentary Output
#6 Vdd
PART NUMBER GUIDE
Series
Number
495
Frequency
- 28.0 M
Voltage
Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating Temp. (°
C)
N
Duty Cycle
-T
Pin 2 Connection
TS
Oscilent
SMD
Oscillators
Enter your freq.
5 = 5VDC D = ±100 PPM
e.g. 28.0M =28.00 MHz 3 = 3.3VDC E = ±50 PPM
Blank* = 0~+70
N = -40~+85
Blank*= 50±10% TS1 = Pin # 1
T = -50±5%
TS = Pin # 2
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: [phone] . E-Mail: [e-mail]
Series No.: 495
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map