CO-494 Datasheet, PDF (2/2 Pages) Oscilent Corporation – 494 Series Surface Mount Crystal Oscillators

Oscilent Corporation | 494 Series Surface Mount Crystal Oscillators
Page 2 of 2
PIN CONNECTIONS
#1 Complimentary Output
#2 Tri-State Enable Low
#3 Ground
#4 Output
#5 N.C.
#6 Vdd
PART NUMBER GUIDE
Series
Number
494
Frequency
- 28.0 M
Voltage
Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating Temp. (°
C)
N
Duty Cycle
-T
Pin 1 Connection
CO
Oscilent
SMD
Oscillators
Enter your freq.
5 = 5VDC
e.g. 28.0M =28.00 MHz 3 = 3.3VDC
D = ±100 PPM
E = ±50 PPM
F = ±25 PPM
G = ±20 PPM
Blank* = 0~+70
N = -40~+85
Blank*= 50±10% CO =
T = -50±5%
Complimentary
Output
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Series No.: 494
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map