CO-493 Datasheet, PDF (2/2 Pages) Oscilent Corporation – 493 Series Surface Mount Crystal Oscillators

Oscilent Corporation | 493 Series Surface Mount Crystal Oscillators
Page 2 of 2
#1 Tri-State or No Connection
#2 No Connect or Tri-State
#3 Ground
#4 Output
#5 Complimentary Output
#6 +Vcc
PART NUMBER GUIDE
Series
Number
493
Frequency
- 28.0 M
Voltage
Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating Temp.
(°C)
N
Duty Cycle
-T
Tri-State Pin
Position
TS1
Oscilent
SMD
Oscillators
Enter your freq.
5 = 5VDC
e.g. 28.0M = 28.00 MHz 3 = 3.3VDC
D = ±100 PPM
E = ±50 PPM
F = ±25 PPM
G = ±20 PPM
Blank* = 0~+70
D = -20~+70
K = -30~+85
N = -40~+85
P = 0~+85
Blank*= 50±10% TS1 = Pin # 1
T = -50±5%
TS2 = Pin # 2
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: [phone] . E-Mail: [e-mail]
Series No.: 493
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map