CO-480 Datasheet, PDF (2/3 Pages) Oscilent Corporation – 480 Series Surface Mount Crystal Oscillator

Oscilent Corporation | 480 Series Surface Mount Crystal Oscillator
Page 2 of 3
PIN CONNECTIONS
#1
Tri-State Enable
High
#2 Case Ground
#3 Output
#4 Vdd
PART NUMBER GUIDE
Series
Number
480
Frequency
- 8.0 M
Voltage
Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating Temp. (°
C)
N
Duty Cycle
-T
Pin 1 Connection
TS
Oscilent
SMD
Oscillators
Enter your freq.
e.g. 8.0M = 8.00 MHz
See table below
for standard freq.
5 = 5VDC D = ±100 PPM
3 = 3.3VDC E = ±50 PPM
Blank* = 0~+70
N = -40~+85
Blank*= 50±10% TS = Tri-State
T = -50±5%
Enable High
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
PART NUMBER CODING - STANDARD OSCILLATOR FREQUENCIES
FREQUENCY (1.8432 - 16.000MHz)
FREQUENCY (16.257 - 80.00MHz)
1.8432
16.257
2.000
16.384
2.4576
17.734475
3.579545
18.000
3.6864
18.432
4.000
19.6608
4.9152
20.000