CO-435 Datasheet, PDF (2/2 Pages) Oscilent Corporation – 435 Series SMD Crystal Oscillator

Oscilent Corporation | 435 Series SMD Crystal Oscillator
#4 Vdd
Page 2 of 2
PART NUMBER GUIDE
Series
Number
435
Frequency
- 12.0M
Voltage Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating Temp.
(°C)
N
Duty Cycle
-T
Pin 1 Connection
TS
Oscilent
SMD
Oscillator
Enter your desired
frequency e.g.
12.0M =
12.000MHz
3 = 3.3VDC
6 = 2.5VDC
D = ±100 ppm
E = ±50 ppm
F = ±25 ppm
Blank* = 0~+70
C = -10~+70
D = -20~+70
N = -40~+85
Blank*= 50±10%
T = -50±5%
TS = Tri-State
Enable High
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: [phone] . E-Mail: [e-mail]
Series No.: 435
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map