CO-430 Datasheet, PDF (2/3 Pages) Oscilent Corporation – 430 Series Surface Mount Crystal Oscillators

Oscilent Corporation | 430 Series Surface Mount Crystal Oscillators
Page 2 of 3
No Connection or
#1 Tri-State Enable
High
#2 Case Ground
#3 Output
#4 Vdd
PART NUMBER GUIDE
Series
Number
430
Frequency
- 2.0M
Voltage Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating Temp.
(°C)
N
Duty Cycle
-T
Oscilent Enter your desired
SMD
frequency e.g. 12.0M =
Oscillators _{12.000MHz See table}
below for standard
frequencies.
5 = 5 VDC
3 = 3.3 VDC
2 = 2.85 VDC
1 = 1.8 VDC
D = ±100 PPM
E = ±50 PPM
F = ±25 PPM
G = ±20 PPM
J = ±15 PPM
H = ±10 PPM
Blank* = 0~+70
C = -10~+70
D = -20~+70
L = -20~+75
N = -40~+85
Blank*= 50±10%
T = -50±5%
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
PART NUMBER CODING - STANDARD OSCILLATOR FREQUENCIES
FREQUENCY (1.8432 - 16.000MHz)
FREQUENCY (16.257 - 80.00MHz)
Pin 1 Connection
TS
NC = No
Connnection
TS = Tri-State
Enable High
1.8432
16.257
2.000
16.384
2.4576
17.734475
3.579545
18.000
3.6864
18.432
4.000
19.6608
4.9152
20.000
5.000
24.000
5.0688
24.576
6.000
25.000
6.144
25.175
7.3728
28.322
8.000
30.000