CO-391 Datasheet, PDF (2/2 Pages) Oscilent Corporation – 391 Series Crystal Oscillator

Oscilent Corporation | 391 Series Crystal Oscillator
Page 2 of 2
(CO) or No Connection
(NC)
#14 Vdd
PART NUMBER GUIDE
Series
Number
391
Frequency
- 28.0 M
Voltage
Supply
Option
-5
Frequency
Tolerance &
Stability (max.)
D
Operating Temp. (°
C)
N
Duty Cycle
-T
Pin 1 & 9
Connection
NC1
Oscilent
SMD
Oscillators
Enter your freq.
5 = 5VDC
e.g. 28.0M = 28.00 MHz 3 = 3.3VDC
D = ±100 PPM
E = ±50 PPM
F = ±25 PPM
G = ±20 PPM
Blank* = 0~+70
N = -40~+85
Blank*= 50±10%
T = -50±5%
TS1 = TS (pin 1)
and CO (pin9)
TS2 = TS (pin 1)
and NC (pin9)
NC1 = NC (pin 1)
and CO (pin9)
NC2 = NC (pin 1)
and NC (pin9)
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Series No.: 391
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map