CO-360 Datasheet, PDF (2/3 Pages) Oscilent Corporation – 360 Series Crystal Oscillator

Oscilent Corporation | 360 Series Crystal Oscillator
#8 Output
#14 Vdd
Page 2 of 3
PART NUMBER GUIDE
Series
Number
360
Frequency
- 4.000 M
Voltage
Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating Temp.
(°C)
N
Duty Cycle
-T
Pin 1
Connection
TS
Gullwing
G
Oscilent
Program.
Clock
Oscillators
Enter desired
frequency e.g.
6.0M = 6.00 MHz
See table below
for standard
frequencies
5 = 5VDC
3 = 3.3VDC
D = ±100 PPM
E = ±50 PPM
Blank* = 0~+70
N = -40~+85
Blank*= 50±10% TS = Tri-State Blank* = Std.
T = -50±5%
Enable High _{G = Gullwing}
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic.
*STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic.
PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications.
STANDARD OSCILLATOR FREQUENCIES - GUIDE ONLY / OTHER FREQUENCIES AVAILABLE
FREQUENCY (1.000 - 9.8304MHz)
FREQUENCY (10.00 - 24.000MHz)
FREQUENCY (24.576 - 80.000MHz)
1.000
10.00
24.576
1.2288
11.0592
25.000
1.8432
12.000
25.175
2.000
12.288
28.322
2.4576
12.800
30.000
3.579545
14.31818
32.000
3.6864
14.7456
32.514
4.000
15.9744
33.000
4.9152
16.000
35.000
5.000
16.257
40.000