813-SL70.0M-09 Datasheet, PDF (2/2 Pages) Oscilent Corporation – Low-Loss IF SAW Filter

Oscilent Corporation IF SAW Filter | 813-SL70.0M-09
PACKAGE OUTLINE
(mm)
TEST FIXTURE
Page 2 of 2
L1 = 220nH
C1 = 36pF
L2 = 220nH
C2 = 68pF
Source/Load Impedance = 50 ohms
PIN Descriptions: IN-11, OUT-5, GROUND-1,2,3,4,6,7,8,9,10,12
Part No.: 813-SL70.0M-09
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map