566-12.0M-3DN-TP1 Datasheet, PDF (2/2 Pages) Oscilent Corporation – HCMOS / TTL

Oscilent Corporation | 566 Series VCXO - Voltage Control Crystal Oscillator
Page 2 of 2
PIN CONNECTIONS
#1 Control Voltage
#2 Tri-State Enable High (TS) or
No Connection (NC)
#3 CASE GND
#4 OUTPUT
#5 No Connection (NC)
#6 VDD
PART NUMBER GUIDE
Series
Number
566
Frequency
- 12.0 M
Voltage
Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating
Temp. (°C)
N
Duty
Cycle
-T
Pulling Range
P1
Linearity
Pin 2
Connection
20
NC
Oscilent
VCXO
Enter your desired 5 = 5VDC
frequency e.g. 12.0M _{3 =}
for 12.000MHz
3.3VDC
D = ±100 PPM
E = ±50 PPM
F = ±25 PPM
G = ±20 PPM
H = ±10 PPM
Blank* = 0~+70
N = -40~+85
Blank*=
50±10%
T=
50±5%
P1 = ±50PPM 20 = 20%
P2 = ±100PPM 10 = 10%
P3 = ±150PPM 05 = 5%
NC = No
Connection
TS = Tri-
State
Enable High
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic.
*STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic.
PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications
Series No.: 566
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map