501-4.0M-315A Datasheet, PDF (2/2 Pages) Oscilent Corporation – HCMOS / TTL / Clipped Sine

Oscilent Corporation | 501 - 504 Series TCXO - Temperature Compensated Crystal Oscill... Page 2 of 2
H
-40 ~ +80^°C
-
-
-
-
x
x
x
x
*Other Temperature and Frequency Stabilities may be available. Check with Oscilent for details.
PIN CONNECTIONS
#1 VCC
#2 OUTPUT
#3 V.C. or GND
#4 GND
#5 GND
PART NUMBER GUIDE
Series
Number
502
Oscilent
501 = TTL
502 = HCMOS
503 = Clipped Sine
Wave
504 = Compatible
Frequency
- 4.0 M
Enter your desired
frequency e.g. 12.0M =
12.000MHz
Voltage Supply
Option
-3
5 = 5VDC
3 = 3.3VDC
Frequency Stability
(max.)
45
15 = ±1.5 PPM
20 = ±2.0 PPM
25 = ±2.5 PPM
30 = ±3.0 PPM
35 = ±3.5 PPM
40 = ±4.0 PPM
45 = ±4.5 PPM
50 = ±5.0 PPM
Operating Temp.
(°C)
D
A = 0 ~ +50
B = -10 ~ +60
C = -10 ~ +70
D = -20 ~ +70
E = -30 ~ +60
F = -30 ~ +70
G = -30 ~ +75
H = -40 ~ +80
Frequency
Deviation
-5
NC = No Connection
(TCXO)
05 = ±5 PPM min.
10 = ±10 PPM min.
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic.
*STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Series No.: 501 to 504
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map