470-8.0M-5EC-TTS Datasheet, PDF (2/2 Pages) Oscilent Corporation – 4 Pad PCB Base HCMOS / TTL Output

Oscilent Corporation | 470 Series Surface Mount Crystal Oscillator
No Connection or
#1 Tri-State Enable
High
#2 Case Ground
#3 Ouput
#4 Vdd
Page 2 of 2
PART NUMBER GUIDE
Series
Number
470
Frequency
- 8.0 M
Voltage
Supply
Option
-3
Frequency
Tolerance &
Stability (max.)
E
Operating Temp. (°
C)
N
Duty Cycle
-T
Pin 1 Connection
TS
Oscilent
SMD
Oscillators
Enter your freq.
e.g. 8.0M = 8.00 MHz
See table below
for standard freq.
5 = 5VDC
3 = 3.3VDC
E = ±50 ppm
F = ±25 ppm
G = ±20 ppm
H = ±10 ppm
Blank* = 0~+70
C = -10~+70
D = -20~+70
N = -40~+85
Blank*= 50±10%
T = -50±5%
NC = No
Connnection
TS = Tri-State
Enable High
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
Oscilent Corporation - CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: [phone] . E-Mail: [e-mail]
Series No.: 470
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map