835-IF240.0M-C Datasheet, PDF (1/2 Pages) Oscilent Corporation – Base Station & Repeater

Oscilent Corporation IF SAW Filter | 835-IF240.0M-C
Page 1 of 2
Part Number
835-IF240.0M-C
Package
35.0 x 12.8 Thru Hole
TYPE :
240.0 MHz Bandpass Filter
Application
Base Station & Repeater
IF SAW Filter
Last Modified
Jan. 01, 2007
PART NUMBER :
835-IF240.0M-C
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Center Frequency
Insertion Loss
Source Impedance (single ended)*
Load Impedance (single ended)*
1.0dB Bandwidth
3.0dB Bandwidth
40.0dB Bandwidth
Amplitude Ripple (Fo+/-1.875 MHz)
Group Delay Variation (Fo+/1.875 MHz)
Absolute Delay at Fo
Ultimate Rejection
Temperature Coefficient
Storage Temperature
Operating Temperature
Minimum
239.85
-
-
-
4.0
4.2
-
-
-
-
-
-
-40
-30
Typical
240.00
26.3
50
50
4.21
4.42
5.25
0.6
100
3.08
50
-0.03
-
-
Maximum
240.15
28.0
-
-
-
-
5.4
1.0
200
-
-
-
+85
+70
Units
MHz
dB
ohm
ohm
MHz
MHz
MHz
dBp-p
ns
µs
dB
ppm/°C
°C
°C
* with Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with
different impedances values and/or structures, if necessary.
** Custom SAW IF Filters available. Contact Oscilent for assistance.
PACKAGE OUTLINE (mm)
PIN Descriptions: IN-1, OUT 5, GROUND -2,3,4,6,Case