820-IF75.0M-J Datasheet, PDF (1/2 Pages) Oscilent Corporation – Base Station & Repeater

Oscilent Corporation IF SAW Filter | 820-IF75.0M-J
Page 1 of 2
Part Number
820-IF75.0M-J
Package
20.2 x 12.6 Thru Hole
TYPE :
75.0 MHz Bandpass Filter
21.40 MHz Bandwidth
PART NUMBER :
820-IF75.0M-J
Application
Base Station & Repeater
IF SAW Filter
Last Modified
Jan. 01, 2007
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
Center Frequency (Fo)
Insertion Loss at Fo
Source Impedance (single ended)*
Load Impedance (single ended)*
-1.0dB Bandwidth
-3.0dB Bandwidth
-40.0dB Bandwidth
-50.0dB Bandwidth
Amplitude Ripple
Group Delay Variation (smo 0.5%)
Absolute Delay at Fo
Ultimate Rejection
Temperature Coefficient
Minimum
-
-
-
-
-
-
-
-
-
-
-
55
-
Typical
75.0
20.6
50
50
20.90
21.40
23.60
23.85
0.55
54
1.72
60
-72
Maximum
-
23.5
-
-
-
-
-
-
1.0
-
-
-
-
*With Matching Network (Ref. Testing Environment Circuit as shown below)
Those impedances could be modified with different impedance values and/or structures, if necessary.
PACKAGE OUTLINE (mm)
Units
MHz
dB
ohm
ohm
MHz
MHz
MHz
MHz
dBp-p
nsec
µsec
dB
ppm/°C
TEST CIRCUIT
PIN DESCRIPTIONS: IN - 1, OUT - 5, GROUND - 2,3,4,6